|
Model: Gaskets - $varies
All of these gaskets are made of High Temp red silicone rubber capable of 400F+ so no worries on any brewing vessel. There are several types available such as replacments for the weldless sight kits, large flat washers for making 1/2" NPT bulkheads, and Orings for sealing your electric heating elements.
Now offering steep discounts for larger lots!
Options: (select from the dropdown below):
- Replacement gasket for my weldless sight kits. This is 1/2" ID, 3/4" OD and are sized to fit over the 1/4" NPT bushing. I have not yet heard of any wear issue on the gasket I supply, but some customers specifically asked that I offer extras to have a couple on hand should the included gasket get damaged.
- This large flat washer is approximately 3/4" ID and 1.5" OD. It will stretch to fit over 1/2" NPT threads/nipples and can be used to create bulkheads.
- This large O-ring is 1.25" ID and will fit over the 1" NPS threads of an electric heating element. It replaces the black rubber gasket that you typically find on the stock elements. You may want to consider buying this along with the 1" NPT locknut here.
|
Comments
Each of the items is for a single gasket.
what size washer fit tbm series?
RSS feed for comments to this post