Model: WLST240 -  $39.95

This is the popular sight glass and thermometer combination kit that is built on the simplicity of the EZ-sight design. The only real difference is the TEE fitting instead of an elbow and it includes a thermometer. Two functions in one convenient weldless setup.

Includes:

• 19" Polycarbonate Tubing rated to 250F.
• SS Tee and Mounting Hardware
• 2" Dial Face Thermometer, 4" probe length, 20-240F range, +/- 1F accuracy.
• High Temp. Silicone Gasket
• Stainless eye bolt for securing the tube to the top of your pot.
• Black Vinyl Numbers for each gallon mark from 2 to 15.(5-50 liter also available, contact me)

Install Requirements:

• Drill a clean 9/16" diameter hole in the side of your HLT or boil kettle and install liquid connection hand tight, or just snug with a wrench. The weldless system is 100% leak free the first time with no teflon tape or messing around.
• Drill a 1/4" hole in the top/side of your vessel and install eyebolt to hold the sight tube vertical.
• Don't forget to grab a Step Bit if ou don't already have one.
• These will NOT work on kegs with the bulge in the sidewall, e.g. Hoff Stevens kegs.

Options:

You must specify if your vessel is straight sided or a converted keg. The tubing meant for a keg is threaded at a slight angle so that it remains vertical when installed into the curved bottom edge.

What kind of vessel?

-K- Converted Sanke Keg -P- Straight sided Pot