Home > Equipment > Keg, Pot, Cooler Parts > Valves >

3-piece (3pc) Ball Valve, 1/2" F/F NPT
3-piece (3pc) Ball Valve, 1/2" F/F NPT


 
Our Price: $17.99

Quantity in Stock:164


Product Code: 3PBV
Qty:

Description
 
This is a high quality, medium weight, stainless (304SS) 3-piece body with a non-restricting "full port" ball and 1/2" NPT female threads on both ends. Use them on your boil kettle, HLT, mash tun, pumps, etc.

3 piece (3PBV) valves as they come apart much easier than 2pc. Just loosen the four bolts and the whole unit comes apart. The end block can even remain attached to your plumbing or vessel. Another benefit of the 3 piece valve is when tightening into a welded port, the orientation of the valve may end up upside down when the threads fully mesh. A 3pc valve can be reoriented in increments of 90 degrees of rotation.
Note when comparing pricing that these are absolutely the smoothest operating valves that we've seen to date in the "under $50 price point". So many companies are offering cheaper and cheaper valves to attract customers but we dare anyone to compare the quality of these valves against the competition. In some cases the handle is so hard to turn you think you may be tweaking the metal on your brew pot wall. We won't mention any names but they are out there on some of the highest priced kettles.

Our primary stock on valves have vinyl handle wraps branded with the BrewHardware.com name but we may ship units with generic graphics from time to time. Be assured that the actual valve is exactly the same. Despite the picture showing a sliding lock on the handle, you may receive a valve without a lock. If it matters to you, please call ahead and we'll advise if the handles have locks or not.
Remember to use teflon tape on all threaded connections.
Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 46 Click Here to Write a Review »

Accessories
Cleaning Brush, 3/4" diameter
Our Price: $3.85

Add
Cleaning Brush, 3/4" diameter
Heat Shield Large sideways clip for Ball Valves
Our Price: $10.00

Add
Heat Shield Large sideways clip for Ball Valves
Ball Valve Replacement Seat Kit
Our Price: $3.00

Add
Ball Valve Replacement Seat Kit


  0 of 0 people found the following review helpful:
 
5 of 5 July 27, 2022
Reviewer: Raymond Hudelson from Okmulgee, OK United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great quality November 17, 2021
Reviewer: Jesse H. from Louisville, KY United States  
Pretty much identical to what Spike uses but costs less

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 July 13, 2021
Reviewer: Brandon Grigsby from Royal Oak, MI United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Solid ball valve August 16, 2020
Reviewer: Wayne Smith from Manchester, NJ United States  
Very nice upgrade to my brew kettle.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Upgraded from 2 piece June 4, 2020
Reviewer: Brian from Dayton, OH United States  
Totally worth the extra $5 to upgrade from a 2 piece valve.  Installed with my mash tun conversion kit.

Was this review helpful to you?

View All Customer Reviews