Blichmann Brew Commander Relay Module

Home > Equipment > Electric Brewing >

Blichmann Brew Commander Relay Module - 240V

Our Price: $199.00

Quantity in Stock:(Out of Stock)

Product Code: ABREWCOMMANDER-240V-RELAY

Qty:

Description

This item is for the relay module which must be used in conjunction with a Brew Commander Controller.

This 240v controller is designed to regulate 240v elements up to 7200 watts at 35 amps but a much more common use would be a 5500 watt element on a 30 amp circuit.

NOTE: We stock a limited number of these at our store/warehouse and will drop ship directly from Blichmann at our discretion.

Understand the voltage and receptacle/circuit requirements for this unit before purchasing:

	This is what the L6-30R the controller needs to plug into and is also the element output

Optional Modifications at Brewhardware:

1. Wall Mount Conversion: This unit comes from Blichmann in "table top" configuration as shown in the picture where the cables come through the back plate. It can also be conveniently wall mounted with minor modification. First, you'll need a DIN rail screwed to your wall (we sell DIN rails, see accessory list on the right). Next, you'll open up the box and move all the wires to prepunched holes in the bottom plate. Blichmann does offer instructions on how to do it yourself but if you would rather it just show up ready to wall mount, we offer this reconfiguration service if you would rather not rewire it. This job takes us about 15 minutes and we've done it a bunch of times. It will take you half an hour. Use the labor item in the accessories list to the right. If you are buying this module in conjunction with a main commander controller and would like us to mount both to the DIN rail and hook up the signal wire. Also, if you do buy both units at the same time, you only have to pay the wall mount conversion one time.

Understanding the "relay module" add on unit:
There seems to be a little confusion on how the add on relay module can be used to expand function to multiple elements. The relay module simple allows an additional circuit/element to be regulated by the same controller. That second element is being turned on and off at the same time as the circuit/element on the primary controller module. In other words, it is not for controlling elements on separate temperatures. The primary application for the relay module is to controller two elements in the same vessel when the size of that vessel can no longer be heated by a single element. You will need two separate 240v/30amp circuits. One to feed the main commander unit for the first element and a second one that runs through the relay module for the second element.

Accessories

Din Rail, 12" Aluminum

Our Price: $4.25

Add

Labor Charge - Convert BrewCommander To Wall Mount

Our Price: $29.00

Add

Labor Charge - Convert BrewCommander To Wall Mount

Share your knowledge of this product. Be the first to write a review »