 |
 |
 |
|
Put this on the end of your hose while you fill your fermenter with chilled wort and the wort will spray out in all directions catching oxygen in the process.
Some people like to use this as a diffusor in a recirculated mash, but we highly encourage you to make sure that this device sits very close to the mash level to avoid splashing
3/8" inside diameter tubing fits.
- SPECs from the manufacturer:
Material: Acetal Copolymer
Compatibility:Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium HydroxideNo: Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329° F Maximum Operating Temperature: 170° F (Repeated exposure over this temperature will cause fatigue)
"Acetal Copolymer" appears to be the generic name for Delrin. More about Delrin on Dupont's site here.
More about food contact from a distributor:
Q: Is Loc-Line safe for food contact"
A: The material used to manufacture Loc-Line is an acetal copolymer. This material, in accordance to the rules 21 CFR 177.2470, meets the requirements of this regulation for aqueous food contact. Not applicable for fatty foods and alcohol. All colorants are used at the recommended let-down ratio and meet 21 CFR 178-3297 for food contact.
|
|
|
 |
|
 |
|
|
|
