Home > Equipment > Pumps / Flow / Tubing > Tubing >

Pump Connection Kit, Camlocks, for INLINE pumps
Pump Connection Kit, Camlocks, for INLINE pumps


 
Our Price: $81.00

Quantity in Stock:171


Product Code: PUMPCONCAMINLINE


The following items are included with this product:



Connection Kit Assembly Options:


Qty:  
Description
 
This connectivity kit is the fastest way to get your pump plumbing figured out and added to the shopping cart. Keep in mind we have a version of this kit for all common pump types using either Camlock (cam and groove) or BLQD type quick disconnects. This particular kit is based on camlocks and is meant for the Chugger, Topsflo, Stealhead, March, MarkII or similar pumps with a 1/2" inlet and 1/2" output. It includes:

(1) Cam A for the inlet side of the pump

(1) 2pc SS ball valve for "out" port of the pump to control flow speed (upgradable to 3pc below)

(1) Type F camlock male for the output of the pump valve

(10) Feet of 1/2" ID ultraclear, high temp silicone tubing (you may additional length as an upgrade accessory)

(2) Type BigC barbed Female camlocks for each end of tubing on the pump sides (straight connection)

(2) Type BL camlocks - Type B with high flow elbow barbs (right angle for vessel connections)

(4) SS hose clamps (unless you select the option for pre-assembly of the hoses in which case we use oetiker style clamps)


These kits do NOT include the pump, or the male camlocks that need to be attached to your donor/recipient vessels or devices. Since it's impossible to anticipate all needs in options here, please go to the the camlocks page for these items or select them in the accessories section below. Hint: most drains require a type F cam to be threaded into the ball valve but look carefully.

Options:
We've added a pre-assembly service to these kits. By default we simply ship you a full 10ft length of tubing and loose fittings and clamps that must be assembled.
If you select one of the assembly options, we will pre-assemble the cam BLs with teflon tape, cut the silicone to the lengths of your choosing and clamp it to the camlocks using oetiker style clamps for a neat finish.

If you add up the individual costs of the components, you'll find that the kit is discounted by a few dollars.


Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 8 Click Here to Write a Review »

Accessories
Camlock Quick Disconnects - Cam A
Our Price: $4.25

Add
Camlock Quick Disconnects  - Cam A
Kit Ball Valve Upgrade - 2pc to 3pc (use only if ordering kit with 2pc Valve as standard)
Our Price: $5.00

Add
Kit Ball Valve Upgrade - 2pc to 3pc (use only if ordering kit with 2pc Valve as standard)
Camlock Quick Disconnects - Cam F
Our Price: $4.50

Add
Camlock Quick Disconnects  - Cam F
Silicone Tubing, Made in USA, 1/2" ID x 3/4" OD (1/8" Thick Walls) PER FOOT
Our Price: $2.75

Add
Silicone Tubing, Made in USA, 1/2" ID x 3/4" OD (1/8" Thick Walls) PER FOOT


  0 of 0 people found the following review helpful:
 
5 of 5 Inline pump/camlock connection kit March 8, 2023
Reviewer: Jim from Ambler, PA  
I've purchased a few things from BrewHardware.  Product quality, customer service, and their quick order fulfillment will keep me coming back time after time.  

I bought two connection kits to plumb new pumps for 5 or 10 gallon batches.  The camlocks are great, and while perhaps not 'one-handed' (at least for most), they make the job of moving tubing a snap.  They seal well and clean well.  

The silicone tubing is top notch and a perfect match for the camlocks.  I bought mine uncut to  better fit my system, but either way you won't go  wrong.  

Bottom line, I'm very happy with the plumbing and have absolutely no regrets.  Get it if you're setting up pumps.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 October 11, 2019
Reviewer: David Stephens from Stanford, IL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great kit June 1, 2019
Reviewer: Jack Robbins from Warrington, PA United States  
Perfect for my pump. Both cheaper and better than other kits I was looking at.  No other kits have the elbows for the kettle/tun ends.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great kit at a great price April 12, 2019
Reviewer: Todd Pattison from Rochester, NY United States  
Very happy with my purchase. I've been wanting a kit like this but was never able to find one quite like it at any of the larger homebrew supply stores. They offer them with the Air Compressor type fittings but not in the cam lock format. They are easier to clean which means less chance of any unwanted nasties that could otherwise be hiding in those ball bearing type connections.
They arrived in a timely manner and packaged well.
I would highly recommend them.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great option July 27, 2018
Reviewer: Fred Fraase from Tacoma, WA United States  
I've been using the 3/8 camlock barbed fittings for a good long while this was a great upgrade. Although I cut the tubing a bit too long and will have to take about 4" off. The clear-ness of the hose is wonderful to see how the liquid is flowing. I wish I started with these.

Was this review helpful to you?

View All Customer Reviews