Return to Hex Nipple, 1/2" NPT PREMIUM Low Profile / Undersized
Sort By::
Page of 3
Click to see more items


  0 of 0 people found the following review helpful:
 
5 of 5 clean and smooth January 10, 2022
Reviewer: Marc from WSMR, NM United States  
Clean and smooth on the inside. Took some extra tape to get a good seal, but no leaks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Undersized is in the title December 16, 2021
Reviewer: Ron from Lancaster, CA United States  
This nipple is great for what it does, but it does require a lot of teflon tape in certain applications because it will bottom out without tightening. Still works.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 perfect part 2 July 13, 2021
Reviewer: David Crowder from Boydton, VA United States  
The edge pick up dip tube and the hex nipple were the exact parts I needed to complete my boil kettle. When I did my first 5 gallon batch I'd forgotten to order these parts and with out them it's much harder to drain the wort. Thank you for the quality of your parts!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good quality February 11, 2021
Reviewer: Bruno from Surprise, AZ United States  
I added a couple of extra wraps of Teflon tape as recommended and it worked perfectly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 19, 2021
Reviewer: Chris Oliva from Los Angeles, CA  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Premium, indeed. October 24, 2020
Reviewer: Matt P from Wilmington, DE United States  
Have several of these. For valves and dip tubes. Will purchase again if needed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 January 13, 2020
Reviewer: Adam from Ohio  
Used it with the high-flow kettle diptube. Works perfectly.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
3 of 5 Not For Mounting Ball Valves January 30, 2019
Reviewer: Greg from Palm City, FL United States  
Because the threads were undersized, they wouldn't tighten enough to secure the ball valve in the proper position before bottoming out on the hex head. I used tons of teflon to eventually get it fairly tight but over time they all loosened again. As advertised, the finish is good and they do seal fine with enough teflon tape. Just be aware that in an instance where you want to be able to snug the fitting enough to securely orient something like a ball valve, the standard nipple is a much better choice.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product! November 6, 2018
Reviewer: Scott from Nashville, TN United States  
Great for my application

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Problem solved! October 18, 2018
Reviewer: Amando Cardenas from ESCONDIDO, CA United States  
This is Bobby's "shtick" offering product that solves problems. Just like he suggest, run a lil extra Teflon or use the thicker stuff & it will not leak!

Was this review helpful to you?

   
  Click to see more items