Return to Make Weldless Kit 1/2" NPT for COOLERs

Sort By:: Most Helpful Newest Rating: High to Low Rating: Low to High	Page of 1

0 of 0 people found the following review helpful:

Works great in my chest cooler! March 15, 2020 Reviewer: Clark from Paicines, CA United States   I used this to install a 6 inch stem thermometer in my mash tun cooler. It works great-easy to install, no leaks. I installed the thermometer first before placing in the cooler. Just follow the instructions and drill carefully. I used Forstner bits for inside and outside holes. Was this review helpful to you?

0 of 0 people found the following review helpful:

June 17, 2018 Reviewer: Brian Nichols from fraser, CO United States   Was this review helpful to you?

0 of 1 people found the following review helpful:

works great December 11, 2016 Reviewer: Chris from SoCal   the gasket has to be placed on the outside of the inner wall Was this review helpful to you?

0 of 1 people found the following review helpful:

1/2" locknut not large enough January 27, 2015 Reviewer: Justin M from Columbus, OH United States   I just installed the 1/2" model on my HD rubbermaid cooler. The threaded locknut that sits inside the cooler wall is too small to adequately compress the gasket. I got a solid leak while testing this, even with a very snug 13/16 inside hole. The gasket warps and twists when you tighten down, not getting a solid seal. From the looks of it, the 1/4" model may compress alright, but this 1/2" model clearly needs a washer included. When comparing to my other kettle weldless, the larger locknut is used there with the same size gasket. That one makes a nice seal, while this is pretty flimsy. Was this review helpful to you?

0 of 0 people found the following review helpful:

Excellent fit November 16, 2014 Reviewer: Anonymous Person from havertown, PA United States   Fit my 10 gallon Igloo cooler perfectly. I added a larger washer as the supplied one seemed a little small. Was this review helpful to you?

0 of 0 people found the following review helpful:

It works November 14, 2014 Reviewer: Eric Carpenter from San Jose, CA United States   Works great on my red Rubbermaid 10 gallon mash tun. Was this review helpful to you?