Home > Equipment > Fittings / Camlocks / Triclover > Camlock Quick Disconnects >

Solder On Male Cam WITH LABOR
Solder On Male Cam WITH LABOR


 
Our Price: $19.00

Quantity in Stock:14

Product Code: CAMSOLDERLABOR
Qty:

Description
 
This fitting allows you to very cleanly add a 1/2" male camlock onto the end of a piece of 1/2" OD or 5/8" OD copper or stainless tubing. This item is for the fitting combined with a labor charge for silver soldering it to a piece of tubing of your choosing. See elsewhere on the site. The photo is showing what the fitting looks like attached to two different sizes of tubing.

It should be obvious that either a stainless racking cane or custom bent 1/2 or 5/8" tubing needs to be on the same order as this item.
Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Click Here to Write a Review »

Accessories
Racking Cane, Stainless Steel, 1/2" OD Tubing, 23" Length
Our Price: $13.00

Add
Racking Cane, Stainless Steel, 1/2" OD Tubing, 23" Length
Custom Stainless Tubing with optional Bends
Our Price: $1.00

Add
Custom Stainless Tubing with optional Bends
Racking Cane, Stainless Steel, 5/8" OD Tubing, 29" Length
Our Price: $18.00

Add
Racking Cane, Stainless Steel, 5/8" OD Tubing, 29" Length
Racking Cane, Stainless Steel, 1/2" OD Tubing, 29" Length
Our Price: $15.00

Add
Racking Cane, Stainless Steel, 1/2" OD Tubing, 29" Length
Silver Solder Stay Brite #8 HALF OUNCE
Our Price: $7.00

Add
Silver Solder Stay Brite #8 HALF OUNCE
Silver Solder Kit
Our Price: $12.99

Add
Silver Solder Kit


  0 of 0 people found the following review helpful:
 
5 of 5 Using it for a carboy filler December 10, 2015
Reviewer: Rob MicroBus Brewery from West Jordan, UT United States  
I recently bought the 5/8 racking cane along with the soldered male camlock to function as a carboy filler.  Soldering was done really well and appears to be high quality.

It used to be a two person job to fill the carboy, one holding the hose, one tilting the boil kettle to get every last drop; now it's a one person job.  It also cut down quite a bit on foaming, so I'm thinking this would work great for barrel filling.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Recirculation October 15, 2015
Reviewer: Carl Noble from Tell City, IN United States  
Thanks to Bobby and the great folk's at BrewHardware. Part worked great!! I feel confident that any type of special piping I will need can be manufactured by this company.
Will use again!!

Was this review helpful to you?