Home > Equipment > Keg, Pot, Cooler Parts > False Bottoms / Filters >

Diptube or Racking Cane Filter Screen 300 Micron
Diptube or Racking Cane Filter Screen 300 Micron

Our Price: $14.99

Quantity in Stock:17


As homebrewers began pushing the limits of dryhop density, we found it difficult to get the beer kegged without constantly clogging up the poppets in both the keg post and quick disconnects with hop debris. This screen is installed in your corny kegs by removing the beer out post and diptube, holding the screen in place and dropping the diptube back into the keg and inside the screen. The screen goes all the way up to the 5 gallon level.

It can also be used with a standard racking cane (but not an Autosiphon).

304 stainless steel, 300 micron, 1" diameter mesh, 22 inches long, sealed flat on the bottom.

You cannot fill the keg through the beer out post when the screen is installed. The next best no-oxygen method in this case is to fully purge with CO2, drop the racking tube into the bottom of the keg and cover the lid opening with some aluminum foil.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
5 of 5 Dip Tube Filter May 9, 2020
Reviewer: Vinny from Rockville Centre , NY United States  
A must have when dry hopping. Some auto siphons will fit inside.

Was this review helpful to you?