Home > Equipment > Electric Brewing > Heating Elements >

Heating Element, 2000 watt, All Stainless Steel

Alternative Views:

Our Price: $29.00

Quantity in Stock:(Out of Stock)

Product Code: ELEMENT2000

No more rusty element bases after two batches! No, we're not the first company to offer these to the homebrewing market, but we are offering the best price by far. This element will make 2000 watts on 120 volts. The length of the element from the hex flange to the tip is 8.5 inches. At 60 watts per square inch, it's effectively a LWD element.

The base on this unit stainless steel and will not rust. The threads are standard 1" NPSL like 99% of the elements you'll find out there. Weldless installs such as with our EWL enclosure kits will require a 1.25" hole in your vessel.

These elements are NOW OFFSET bent meaning that the package of four tubes is generally centered about the screw base so as not to touch the walls of a RIMS tube. You may need to mildly tweak the element to get it to perfectly avoid touching the inside of a RIMS tube, but nowhere near as much as you would for a non offset element.

Note: the manufacturing process causes some heat discoloration on the stainless and they are not polished or visually stunning in any way. While we typically like our equipment to look shiny as possible, this item is more about durability and function.


It is extremely important that you consult with an electrical professional for advice or wiring help. Under no circumstances should these be used without proper wiring, ground fault circuit protection, over current circuit protection. We are not licensed electricians so we cannot provide wiring advice.

Average Rating: 4.5 of 5 Total Reviews: 21 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
It Does what I need it to. February 16, 2017
Reviewer: Grey Dziuba from Rome, GA United States  
I never had to worry about boil over with the grainfather, but I do now.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
strike and tun water heating October 6, 2016
Reviewer: Donald Schubert from Vernon, CT United States  
guidance by Brewardware was great for retrofitting two old kettles for these uses!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
exactly as described September 16, 2016
Reviewer: Austin K. from Coon Rapids, MN United States  
Bought this element for a RIMS system and because it is an all stainless element. Works great, could not be happier.

Thanks brewhardware for the fast shipping and excellent service.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Heating element review August 22, 2016
Reviewer: Anonymous Person from Annapolis, MD United States  
Product arrived very quickly. I was able to install the new element into my 10 gallon kettle with out any issues. Brewed a 6 gallon batch the same weekend. Didn't have any issues bring the strike water or wort to temp. No problem with scorching either. Very pleased. Would recommend and buy again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Very Good March 6, 2016
Reviewer: Joe from Lakewood, CO United States  
The stainless steel heating elements work very good for my application. I was having a lot of problems with rust and that took care of it. Got them quick.
Thank you

Was this review helpful to you?

View All Customer Reviews