Home > Equipment > Electric Brewing > Heating Elements >

Heating Element, TC integrated 2250 watt (120v), All Stainless Steel
Heating Element, TC integrated 2250 watt (120v), All Stainless Steel


 
Our Price: $65.00
Sale Price: $62.99
Savings: $2.01

Quantity in Stock:9

Product Code: ELEMENT2250_TC
Qty:

Description
 
This version of the TC element is 2250 watts at 120 volt. Pulling 18.75 amps, this is about the highest wattage you can run on a standard 20 amp circuit (with a little room for a pump). At 9" long with a partial foldback, this element is low watt density so you should not have any scorching issues. 2250 watts appears to be the minimum power needed for a real boil in 6-7 gallons of wort. You won't beat any speed records getting there but it will reach a boil and maintain it.

GENERAL:
These new elements are pretty slick. The traditional way to get an element into a TC port is to use an adapter such as our Hot Pod ETC which then had to be hardwired to a cord. These Ripple TC elements don't have screw in bases but are welded right to a 1.5" TC flange. Not only that, but the electrical connection is made by integrated NEMA L6-30P blades. You can twist an L6-30R cord end right on. This gives you the ability to disconnect at the pot rather than drag the cord around. While the L6-30P plug configuration is a standard usually used for 30 amp 240 volt, these 120 volt elements use it for manufacturing consistency.

The power requirement of this element is only 120 volt and 20 amps so they can be plugged in to SOME 120 volt outlets in the house. You will do this by making up an adapter cable that has a regular 20 amp plug on one side and an L6-30R on the other end. You have a few options here. The L6-30R Cable we show in our accessories list has the female on it that connects to the element and then you can wire the Nema 5-20 plug onto that. The downside is that the wire is only 5 feet and it's oversized for 20 amps. The other way to do it is to grab whatever length of 12/3 SJEOOW cable you need and wire a Nema L6-30R on the element end and one of the 5-20P plugs on the other end.

You will need a 1.5" TC port on your kettle and we offer several different ways to get that done; weld ferrule, solder ferrule, and weldless. These are available separately. The L6 cable is also available as a separate item.

Element length is approximately 9" Long to the TC flange. If you are using it for RIMS, it will fit in either our 12" or 18" RIMS tubes.

Everything is 304 High polish stainless steel.
These are made in China. Warranty is 6 months from date of purchase and does NOT cover damage due to dry firing. These elements must be submerged in liquid any time power is applied.

It is extremely important that you consult with an electrical professional for advice or wiring help. Under no circumstances should these be used without proper wiring, ground fault circuit protection, over current circuit protection. We are not licensed electricians so we cannot provide wiring advice.
Instructions
Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Click Here to Write a Review »

Accessories
TRUE Weldless 1.5" TC Triclamp Bulkhead - STD up to 1/8" Wall
Our Price: $24.00

Add
TRUE Weldless 1.5" TC Triclamp Bulkhead - STD up to 1/8" Wall
Cable Plug, Nema 5-15P Plug for 120v, 15 amps
Our Price: $3.75

Add
Cable Plug, Nema 5-15P Plug for 120v, 15 amps
Cable, 10/3 SJEOOW High Temp Portable Power Cable by the foot
Our Price: $1.75

Add
Cable, 10/3 SJEOOW High Temp Portable Power Cable by the foot
Receptacle, Nema L6-30R Twist Lock Cord Receptacle for 240v, 30 amps
Our Price: $13.99

Add
Receptacle, Nema L6-30R Twist Lock Cord Receptacle for 240v, 30 amps
1.5 TC Clamp
Our Price: $7.00

Add
1.5 TC Clamp
Cable, 10/3 Cord with Nema L6-30R Twist Lock Cord Receptacle
Our Price: $24.99

Add
Cable, 10/3 Cord with Nema L6-30R Twist Lock Cord Receptacle
1.5 TC Radius Face Solder Flange
Our Price: $20.00

Add
1.5 TC Radius Face Solder Flange


  0 of 0 people found the following review helpful:
 
5 of 5 Exactly what I needed July 5, 2020
Reviewer: Mike Miller from Baytown , TX United States  
My heating element came in on time plugged it in and work perfectly. Now I can get my brew up to temperature in no time and i have much better control over the heat vs open flame with the PID matched up with the 2200 w  element.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 If you are limited to 120v you need this! December 5, 2019
Reviewer: Kurt from Lumby, BC Canada  
Conducted a field trial of this TC 2250w element yesterday. 16 gallon kettle(wrapped in reflectix), 7 gallos of water, temperature in my garage was 2.9 degrees Celsius. Heating rate was roughly 1 degree per minute when I was not recirculating and about 0.8 when I was. That time gives me a chance to get stuff done between events!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 March 18, 2019
Reviewer: John from Audubon, NJ United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fantastic January 28, 2018
Reviewer: Jason Sharp from Bloomingdale, IL United States  
Stainless elements with triclamp fittings already attached.  Yes please!!  This thing is fantastic!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Great Product and customer service December 6, 2017
Reviewer: Anthony  
Bought this to replace my 2000 watt element. The extra watts do help push it to a boil and it worked out great.  Do yourself a favor and order the plugs and power cord listed next to the product. Bobby has the best prices and knows which will work best. I went to a big box store and bought the wrong plug and found out the right one was ridiculously over priced.  I called Bobby last minute before the weekend and he made sure it went out. Thanks you!

Was this review helpful to you?