Home > Services > Standard Labor >

Labor - TIG Weld 1.5" or 2" TC Ferrule
Labor - TIG Weld 1.5" or 2" TC Ferrule

Our Price: $32.99


This charge is for drilling single hole in a customer's vessel, pulling a flare and TIG welding a 1.5" or 2" TC ferrule. If we are doing this install on a brand new pot that is to be shipped to the customer, the install location must be clearly described in the check out notes, via email, etc.

We understand that your precious brewing vessel is not an old trailer hitch in need of a quick bush-fix. We use custom made tooling to ensures that the weld is protected from oxygen. The interior of the welded area will remain clean and generally smooth. For this particular labor charge, we do not grind, hone or polish other than to remove any heat discoloration. The picture below shows a typical interior finish. It would not be considered fully sanitary, such as what you'd want below the liquid level in a fermentation vessel, but otherwise perfectly serviceable in all other applications. We DO have another labor option that does include grind and polish finish work for a few dollars more.

We can usually do this job while the customer waits but we can't guarantee that. You may want to call ahead to make sure we have enough coverage in the store.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
5 of 5 Clean joint March 18, 2019
Reviewer: John from Audubon, NJ United States  
High quality silver soldering job.  Very nice work

Was this review helpful to you?