Home >

Brewing System, 3 Vessel Electric HERMS, 15 Gallon Kettles, Fully Assembled
Brewing System, 3 Vessel Electric HERMS, 15 Gallon Kettles, Fully Assembled


 
Alternative Views:


Our Price: $1,999.00


Product Code: SYSTEM_3V_E_HERMS_15G
Qty:



The following items are included with this product:

Description
 
3 Vessel Electric HERMS System, 15 Gallon Pots for 10 Gallon Batches.
This system is nearly turnkey. However it does not include the cart/table, wort chiller, nor a controller. The BrewBuilt kettles coupled with BrewHardware's premium accessories make for a system with no regrets. While there are some higher end components in this build, nothing was chosen specifically for flash or brand name. On the other hand, whenever a little extra spending achieved a better result, it was included in the build. The combination of efficient and silent electric elements, along with the powerful, compact and equally silent pumps, make for a pleasant indoor brewing experience. The 15 gallon kettle sizing allows for brewing either 6 or 11 gallon batches (post boil). The system is most efficient using the fly or continuous sparging method. We include a Blichmann autosparge on the mash tun to allow for simple flow rate matching without babysitting.




HLT:
  • BrewBuilt 15G Kettle
  • Welded drain port with standard 2pc Valve (upgradable to 3pc)
  • Internal Whirlpool style Edge Pickup diptube (with premium hex nipple)
  • Welded whirlpool port with standard 2pc valve and internal whirlpool tube. (with premium hex nipple)
  • 42' x 1/2" OD Stainless Steel (304SS) HERMS coil / Heat Exchanger
  • TIG welded pull through compression fittings for coil, 2pc ball valve standard on lower port (upgradable to 3pc)
  • TIG Welded 1.5" TC ferrule port, TC integrated 5500 Watt ULWD Heating element, clamp and gasket.
  • Camlocks on all external ports (3F, 1A)
  • (labor; TIG WELD 3 ports, thread everything together on kettle.)
MLT:
  • BrewBuilt 15G Kettle
  • Welded drain port with standard 2pc Valve (upgradable to 3pc)
  • Gasketed full diameter false bottom with center draw diptube and quick release.
  • Blichmann Autosparge with loc-line return tubing.
  • Camlock Male QDs on all ports (1F, 1A)
  • (accum.. labor; drill hole for AS)
Boil Kettle:
  • BrewBuilt 15G Kettle
  • Welded drain port with standard 2pc Valve (upgradable to 3pc)
  • Internal Whirlpool style diptube (premium hex nipple)
  • Welded whirlpool port with standard 2pc valve and internal whirlpool tube. (premium hex nipple)
  • TIG Welded 1.5" TC ferrule port, TC integrated 5500 Watt ULWD Heating element, clamp and gasket.
  • Camlock Male QDs on all ports (2F)
  • (accum.. labor; TIG TC)
PUMPS/Tubing
  • Water Pump; Topsflo TD5 with Camlock Female on input, 13" Silicone hose with 90 degree Female Cam.
  • Wort Pump; Topsflo TD5 with Camlock Female on input, 15" Silicone hose with 90 degree Female Cam.
  • HERMS to Autosparge Jumper Hose; 8" Silicone hose with female cam on both ends (2 Big C)

*The stainless prep table shown in the pictures is 18" deep x 60" wide and can be purchased from a restaurant supply store.
*There is a total of six ball valves in the build. If you would like to upgrade to 3pc valves, use the 2to3 upgrade in the accessories but be sure to add qty 6.
*Chiller preference is so personal that we decided to leave that out of this package. If you choose to use an external heat exchanger such as a plate or CFC, you will have plenty of hoses to make the connections.

Expect a lead time of at least a week when you order this system as they are built on demand. If our supplier for the kettles is out of stock, we will contact you immediately.


Share your knowledge of this product. Be the first to write a review »