Home > Equipment > Fittings / Camlocks / Triclover > Triclover >

1.5" TC x Splitter Hose Barb (for 1/2" ID tubing)
1.5" TC x Splitter Hose Barb (for 1/2" ID tubing)


 
Our Price: $25.00

Quantity in Stock:1


Product Code: TC15_SPLITTERBARB
Qty:

Description
 
This is a custom made fitting for splitting the output of a 1" or 1.5" TC port into two 1/2" ID hoses. This can be used in place of a typical TC ported TEE if the only purpose of the tee was to feed two hoses. This fitting saves you the bulk and cost of a tee, two clamps, two gaskets, and two hose barb adapters. Essentially, this is replacing up to $60 worth of parts.

The initial planned usage for the fitting is to retrofit the Spike Solo system with the concept of dual-path recirculation. This fitting would clamp directly to the pump TC equipped pump output and one hose output would go to the whirlpool return valve and the other hose would go to the basket recirculation port (where the pump output valve has been relocated). Now both hoses are fed with equal pump power but the ends of the hoses have valves to regulate the flows to either whirlpool or recirculation.

Note that the factory weld on the tubing side of this assembly isn't what we would consider cold side sanitary. In other words, it's fine for hot side wort production but we wouldn't recommend using it for post fermented beer.

304SS

Compatible with 1-1/2" TC gaskets and clamps, etc.

Share your knowledge of this product. Be the first to write a review »