11 gallons per minute flow rate*
18 ft Max Head*
IP55 Water Resistant
Sanitary DIN Fitting Stainless Head with 1.5" TC Center Inlet
120 VAC 60hz 0.7 A
Assembled dimensions: 5.5” x 4.5” x 9.75”
Package dimensions: 7.25” x 7.25” x 12” - 11.75 lbs
*flow rate decreases as head pressure increases and vice versa. You will not get 11GPM at full 18ft max head.
From the Ground Up
Designing our own pump is something we have been eyeing for a while. Pumps are critical to any form of advanced brewing. From mash recirculation to transferring wort to cleanup, a quality pump is a key part of every brewday.
Years of working in professional craft brewing environments, where water-resistant pumps are the norm, made the foundation of our brew pump an easy decision. It had to be IP55 rated to handle the unavoidable messes that happen and the cleanups that follow them.
Once we unlocked the design for waterproofing, we turned to a laundry list of specs and features we wanted. That led to the creation of the Ss Brew Pump; one of our favorite products and now a staple in all of our team’s homebrew setups.
360° PRO DIN FITTING
Commonly found on Pro Brewing Tanks, DIN fittings allow for a secure and sanitary connection that is also super easy to use. Unlike a TC connection, the DIN Head on Ss Brew Pump allows for a secure connection that applies even pressure on every bit of the silicone seal and is easier to remove and reinstall without having to fumble with a large clamp.
The DIN Head can also be rotated and secured in a full 360 degrees so that you can place the Pump’s outlet exactly where you need it for your brewing setup.
