Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-300 in increments of 5
Sight Calibration Decals 5-300 in increments of 5
 
Our Price: $9.00

Quantity in Stock:6

Product Code: CAL5-300
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


Premium Recirculating Electric (240v) BIAB Package (Get Tanked Edition)) $1,250.00
Clearance** Champagne Stoppers 100ct $5.00
NPT Male, 1/4" to Keg Post Adapter 19/32" -18 Thread $5.25
Quick Disconnects (BLQD) Type A - MQD x FNPT $8.00
Spike 30gal Plus False Bottom(TC pickup tube) $203.50
RIMS Hardware Kit 18" Body Length - 1/2" Male NPT I/O Ports $158.00
Sight Calibration Decals 5-140 in increments of 5 $5.00
Omega GLUTEN FREE Lutra Kveik OYL-071 Dry Pack 11g $8.99