Home > Equipment > Kegging Parts > Beer Side, Faucets etc >

1.5" TC to Female Beer Thread Adapter
1.5" TC to Female Beer Thread Adapter
 
Alternative Views:
Our Price: $13.99

Quantity in Stock:70

Product Code: TC15XFEMALEBEERTHREAD
Qty:

Description
 
These fittings give you 1.5" TC Triclover ports on any beer thread fitting. The primary usage would be to create a Sanke Keg cleaning system based of a pump and hoses that already use TC flanges.

The fitting is shown threaded on to the beer out port of a Sanke coupler, but the coupler is not included obviously. In order to pump into the beer out of a Sanke coupler, you will need to remove the check ball from inside.

The fitting ships with a silicone oring installed.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 3 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome Monday, February 26, 2024
Reviewer: John Stephens from Royse City, TX United States  
Enjoy reading the wrapping paper from another state. 😂

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Game changer! Tuesday, April 20, 2021
Reviewer: Not from around here  
This is exactly why I shop here.  This is a pretty specialized part, but if you need it, where else could you possibly find it?!  Since I was modifying  an AerVoid beverage dispenser to become a mash tun, this was the missing link.  Thanks, Bobby!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
3 of 5 Nice, but threaded section too long for coupler Monday, November 25, 2019
Reviewer: Justin from Canada  
Seems like a good fitting. The larger bore + o ring design maximizes flow rate - ideal for keg cleaning and filling applications. The threads match well with the couplers I've tried. My only issue is that the threaded section is a bit too long and the fitting can not be installed far enough to compress the o-ring on some couplers I've tried. I hope to remove 3/8" from the threaded section or so, so I can use it as intended.

BrewHardware.com Response: That is very odd. They work for all the coupler types we have handy in the shop.  I'm sure there are a few odd designs out there.

Was this review helpful to you?



Tap Tower, Brushed SS, for FOUR Faucets (faucets not included) $119.00
Sight Calibration Decals 5-200 in increments of 5 $8.00
Munich Malt (Barke), Weyermann Sack $82.50
Blichmann 1/2" NPT Brewmometer Fahrenheit (aBM_NPT_F) $24.00
Simcoe Hop Pellets, OZ $2.26
CELEIA (Styrian Golding) Hop Pellets, LB $19.99
USED Italian 3 Gallon Glass Carboy $28.00
Pot to Boil Kettle or HLT Kit - 3 Port: Drain, Sightglass and Thermometer $82.00
Cable, 10/3 Cord with Nema L6-30R Twist Lock Cord Receptacle (approx 5ft) $29.99