Home > Equipment > Kegging Parts >

Sanke Keg Coupler Ball Lock Post Conversion Set
Sanke Keg Coupler Ball Lock Post Conversion Set
 
Alternative Views:
Our Price: $24.99

Quantity in Stock:2

Product Code: SANKEBALLLOCKSET
Qty:

Description
 
If you replace your tailpieces and nuts on the gas and liquid ports on your Sanke commercial keg coupler with these, you can directly attach your home brew ball lock quick disconnects on to the coupler. This allows you to go back and forth between commercial and homebrew ball lock kegs on the same set of hoses without cutting hose, undoing hose clamps, or using wrenches on flare barbs.

This set comes with one gas post and one liquid post. As you may not be aware, the post profile is slightly different between liquid and gas. These both have universal poppets installed with replaceable orings. Removal of the poppet requires prying out a retaining snap ring. It can be done with a small screw driver but snap wring pliers would make it much easier.

The image on the left shows the set installed on a Sanke Coupler. Note that the coupler is not included in this price but it is available on this site and also shown as an add on accessory on the right.

Note that we also have cheaper way to make your Sanke coupler accept home brew ball lock QD connections but it does require that your ball lock QDs have the MFL ports.

Accessories
Keg Coupler, Economy, Euro Beers (Type S) Ball Lock Keg Disconnect - Gas Side - Male Flare MFL (CMB) Ball Lock Keg Disconnect - Beer Side - Male Flare MFL (CMB)
Sale Price: $29.99

Add
Our Price: $4.19

Add
Our Price: $4.19

Add
Keg Coupler, Economy, Euro Beers (Type S) Ball Lock Keg Disconnect - Gas Side - Male Flare MFL (CMB) Ball Lock Keg Disconnect - Beer Side - Male Flare MFL (CMB)

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 7 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 5 Star Thursday, March 5, 2026
Reviewer: Anonymous Person from Annapolis, MD United States  
Excellent customer service!  I don't care if it works or not.  

I called the number to describe my issue.   They solved my problem way better then the solution I had envisioned.  Not only was it a better idea it was significantly cheaper.  Hats off to the old school approach, call us we will create a solution and send it out today!   I'm going to be wasting more time and money on brew stuff just to buy from Brewhardware.com

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 A brilliant product Sunday, February 8, 2026
Reviewer: Dave Greenbaum from Cherry Hill, NJ  
These are solidly constructed and make using a Sanke coupler easy.

To tell the gas from liquid adapters, you can test fit a gas and a liquid ball lock QD, but there's an easier way--the gas adapter has a groove in it around where you'd put a wrench to tighten it.  Groove=Gas makes it easy to remember.

I did have one problem with these.  After installing them, I had a leak from the liquid out adapter.  After taking it off, I saw part of the washer had squeezed out during tightening.  The washers are very soft.  Swapping it for a stiffer one fixed the problem.  If not for the washer, the rating would be 5/5.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Superb! Saturday, March 26, 2022
Reviewer: aufrankie from pike road, AL United States  
Having these in a set is excellent. I wish there was a way to slightly indicate the gas from the liquid and vice versa but if you hook it up and doesn’t flow just swap them out. Works perfectly on my local brewery donations to our neighbor taproom.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
1 of 5 Wished they worked Monday, November 25, 2019
Reviewer: Ryan Martz from Colorado Springs, CO United States  
It is a great idea but I just tried to use them this last weekend and they leaked CO2 and beer. The ball lock couplers wouldn't sit right on the posts.

BrewHardware.com Response. Another case of writing a review without ever contacting us. We have sold over 500 of these adapters with no problems. You probably just had the gas and liquid adapters reversed. They are different.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Works awesome Saturday, August 18, 2018
Reviewer: Chip Fulkerson from Thompson, OH United States  
The moment they arrived. I opened and was satisfied. Took only minutes to install and start pouring.

Was this review helpful to you?

View All Customer Reviews


Peat Smoked Scotch Malt, Crisp LB $2.19
Nema 14-30P Cord Plug for 4-wire 240v, 30 amps $14.99
Used Glass Carboy, 6 Gallons $31.00
Syringe, 10ml with 4" blunt tip needle $4.39