Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-140 in increments of 5
Sight Calibration Decals 5-140 in increments of 5
 
Our Price: $5.00

Quantity in Stock:70

Product Code: CAL5-140
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


Blichmann 1/2" NPT Brewmometer Fahrenheit (aBM_NPT_F) $24.00
Brew Built Conical Collection Jar 3" TC with lid (Gen2) $27.99
Hops Batch Builder
1.5 TC x 5/8" Hose Barb 90 Elbow $15.99
Racking Cane, Stainless Steel, 1/2" OD Tubing, 29" Length $15.00
Flavoring, Natural, Watermelon, 4oz $4.39
Five Star Sani-CLEAN (NOT STARSAN) 16 oz Purple Liquid $14.29
1.5 TC x 3/8" Hose Barb 90 Elbow $13.00
Quick Disconnects (BLQD)Type C 90 - FQD x 1/2" 90 Barb $14.99