Home > Equipment > Fittings / Camlocks / Triclover > Triclover >

1.5 TC LONG Weld Ferrule
1.5 TC LONG Weld Ferrule
 
Our Price: $4.60

Quantity in Stock:112

Product Code: TC15LWF
Qty:

Description
 
The 1-1/2" Triclover (TC) Long Weld Ferrule is typically welded into a sidewall of a vessel where you need a port. If you're building a brewery based on the sanitary/triclover method of device attachment, you'll have these all over the place. The tube OD is 1.5", the flange measures 2", and the overall length is 1.125". The length of this ferrule makes it possible to use ripple style heating elements. These are extremely high quality machined pieces in 304SS. Note that we also stock this item in "medium" length at 7/8" depth but the extra 1/4" length of the LONG will give you a little more clearance for the TC clamp wingnut and in some cases give you just the extra length needed to get heating elements into smaller pots.

Despite the rampant misinformation circulating around the forums, a ripple style heating element, or at least the ones we sell here, will pass through this ferrule easily. You do NOT need 2" TC.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 8 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Used for a bottom drain Tuesday, October 7, 2025
Reviewer: Vesko from Auburn, AL United States  
My brew kettle (a 15 gallon DIY keggle) needed a bottom drain to maximize wort recovery, but most importantly, now I can wash it without the need to lift and tilt to drain dirty water. I used the Install Tool (pull through flaring) for 1.5" TC Weld Ferrules together with the Silver Solder Kit and it work flawlessly. Easier, and less tiresome, cleanup days are upon me haha

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good product Saturday, October 12, 2024
Reviewer: Brice Purser from Iron City, TN United States  
Most of these you find other places aren’t long enough to use the pull through process. These are perfect with the tool they also sale for pull through and silver solder applications.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Monday, April 25, 2022
Reviewer: Odin Anderson from Bellevue, WA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Thursday, March 17, 2022
Reviewer: Beeroquois Nation from GILMAN, IL United States  
TIG welded perfectly. Quality thick ferrule, the kettle was thinner by far than the ferrule. Would buy again.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Monday, November 22, 2021
Reviewer: Sara Wood from Fircrest, WA United States  


Was this review helpful to you?

View All Customer Reviews