Home > Equipment > Keg, Pot, Cooler Parts >

Make Weldless Kit 1/4" NPT, For Thermowells
Make Weldless Kit 1/4" NPT, For Thermowells
 
Our Price: $4.00

Quantity in Stock:5

Product Code: MWL14THERMOWELL
Qty:

Description
 
If you want to install one of our thermowells into your vessel (keg, pot, cooler), all it takes is a silicone gasket and half coupling available as a kit here.The gasket goes against the hex of the thermowell bushing, the threads of the bushing go through a 1/2" hole in your vessel wall and finally the half coupling is threaded on from the other side. We could have used a locknut to do the same thing, but the half coupling provides a slicker look and is easier to clean.

Note, the picture shows the kit threaded on to a thermowell but the thermowell is NOT included with this item.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 9 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 fermenter temperature control Tuesday, February 10, 2026
Reviewer: barrie drabble from Southport, NC United States  
using these long thermowells allowed me to build a fermented from a 15 gallon ss kettle and feed the temperature probes through the lid instead of drilling a hole through the wall of the kettle. it make clean uo and sanitation a lot easier

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Retrofitting a Brew Bucket Tuesday, August 28, 2018
Reviewer: Peter Wiley from Hingham, MA United States  
I retrofitted a thermowell into my Brew Bucket with this kit and the TW10-L-1/4-R termowell, works perfectly!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
3 of 5 needs better o-rings Tuesday, December 20, 2016
Reviewer: Carlos Munoz from San Diego, CA United States  
the fittings are nice the one thing I didn't like were the gaskets are too soft.  I changed them out for o-rings and is much better. I'm using these thermowells in my kegs so I want a tight seal.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Easy to use, secure Saturday, March 26, 2016
Reviewer: Zach Marteney from Stamford, CT United States  
Great addition to both my fermenter and my kettle. Easy to install, secure, no leaks on the first try.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Just what I needed. Sunday, January 17, 2016
Reviewer: OleGoatBrewing from Ewa Beach, HI United States  
Added this to my SS Brew Bucket. I live in Hawaii and need to order "everything" for my brewery.  Price and shipping was best I could find. ~ thanks!

Was this review helpful to you?

View All Customer Reviews


Blichmann G2 Linear Flow Valve with 1" or 1.5" TC ports (BE-002055-00) $60.00
Pinch Clamp XL for up to 9/16" OD tubing (7/16" thinwall racking) $1.79
2" TC x 1/2" NPT THREADED TEE $18.00
CO2 Hose - Bevlex Tubing, Ball Lock QD to open end (for barbs) $8.99
CaraAroma, Weyermann LB $2.48
Potassium Metabisulfite, 1 LB $9.89
1/2" NPT to 1/2" OD Tube Compression Elbow $17.00
True Weldless Bulkhead - With Large BARB $15.00
Cable, 10/3 Extension Cord SIX FEET (6') Nema L6-30 Male and Female $37.00