Home > Equipment > Keg, Pot, Cooler Parts >

Make Weldless Kit 1/4" NPT for COOLERs
Make Weldless Kit 1/4" NPT for COOLERs
 
Our Price: $7.00

Quantity in Stock:13

Product Code: MWL14COOLER
Qty:

Description
 
If you want to install a dial thermometer in a double wall cooler, you'll need an extended bulkhead like these. Here's how they work: The dial thermometer threads directly into the open end of the coupling. The coupling extends through the outside wall and insulation of the cooler and then the weldless bushing/gasket seals to the interior wall of the cooler. This 1/4" NPT version requires a 3/4" hole in the outside wall of the cooler and a 1/2" hole in the interior wall. The weldless bushing piece in this assembly is custom machined just for us so this isn't something that can be easily made from "off the shelf" parts.

Keep in mind that this bulkhead is NOT meant for draining liquid out of your cooler.

The picture below shows the application of this bulkhead for use with a dial thermometer. The picture shows both available sizes. BE VERY CAREFUL WITH THE SIZES OF HOLES REQUIRED ON THE INSIDE AND OUTSIDE WALLS OF THE COOLER.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Wednesday, September 19, 2018
Reviewer: David Kilgore from Jenison, MI United States  


Was this review helpful to you?



Hex Nipple, 1/4" NPT PREMIUM LOOSE $3.99
Super Sucker Transfer Pump Self Priming $59.00
CO2 Hose - Duotight FFL to Grey Ball Lock - 3ft Long $10.49
Ekuanot Hop Pellets, OZ $2.59
Spike Closed Pressure Transfer Kit $71.50
Spike TC100 Glycol Hose Coupler (x2) $11.00
Spike 15 Gallon V4 Blank Slate Custom Kettle $319.00
Spike Flex Fermenter $347.00
Spike CF15/CF30 Temperature Control Coil $121.00