Sight Calibration Decals 5-60 in increments of 5

Home > Equipment > Vinyl Decals >

Our Price: $3.00

Quantity in Stock:57

Product Code: CAL5-60

Qty:

Description

If you transferred your sight kit to another pot, you'll need to recalibrate it so we are offering the numbers separately. These also complete the job if you've built your own DIY sight glass or (GASP!) purchased a kit from someone else.

Note, the image shows the numbers to only 50 but we've added the 55 and 60 to current strips.

These numbers are typical of calibration of Litres in a smaller pot or for use with barrel calibration where the numbers would represent gallons.

Instructions

- Your sight tubing must be dry and clean with no oils or dust.
- With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.
- Use a vertically applied length of masking tape on the sight tube as
- a straight edge and to have a place to mark the gallon levels.
- Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »

	Simcoe Hop Pellets, LB $27.50
	Flavoring, Natural, Apricot, 4oz $4.90
	Golden Promise, Simpsons OZ $0.14