Home > New Stuff >

Anvil Foundry System 10.5 Gallon Electric System w/Recirculation Pump Kit
Anvil Foundry System 10.5 Gallon Electric System w/Recirculation Pump Kit
 
Our Price: $675.00

Quantity in Stock:(Out of Stock)

Product Code: ANVILFOUNDRY105_PUMP
Qty:

Description
 
Yes. There are a LOT of all in one electric brewing "urns" out there. If you're shopping for one of them, your head is now spinning.

This particular unit includes a pump and necessary accessories for recirculation.


We will not hash out every little feature of these units but we'll give you an idea of what makes the Anvil version so different.

  • First, none of them have a 10.5 gallon capacity like the Foundry. What that means is that most smaller boiler systems force you to perform a sparge to reach your boil volume. Of course, the Foundry allows for a sparge if you wish but you can also perform a full volume, no sparge mash which doesn't require a separate vessel to heat sparge water in. You'll trade a few points of efficiency but less work and hassle.

  • The most important difference from our perspective is the higher power element. If you don't mind doing a little extra work to get a 240 volt circuit set up, you'll have a whopping 2800 watts at your disposal. No, that's not earth shattering power compared to what you can do with a 5500 watt "ripple" style element, but it is a full 1200 watts higher than all the other all in one units including the Grainfather, Mash N Boil, and Robobrew. We sell hundreds of HOT RODS to help assist those anemic units. Long story short, the Foundry system can run on either 120 volts at 1600 watts or 240 volts at 2800 watts. This isn't just marketing fodder. In the case of full volume mash, starting with 7 gallons of water. It will take 1600 watts a full HOUR to reach dough in temps. At 2800 watts, that's only 36 minutes. When you're ramping from mash to boil, the respective times are 42 and 24 minutes respectively. In summary, the 2800 watt option saves you 42 minutes of heating time. The other thing to consider is that 1600 watts is BARELY enough to boil the wort but 2800 definitely gets you rolling.

Talk to your local electrician to see what it would take to add a 15 amp, 240v GFCI protected circuit to your brewing area. It's worth it.

  • Another perk of the Foundry is that the lower 4" of the grain basket is also perforated just like the bottom disc which more than doubles the drainage of the other units.
  • Double wall construction means that you get better heat retention than the competition WITHOUT having to cover up that nice stainless with some jacket.

  • Last, the lid is gasketed and has built in spring latches so you can easily convert the unit to a distillation boiler simply by adding either the Turbo500 copper pot still arm or the Turbo500 reflux condenser.


Shipping: This system does not include free shipping. The truth is that our profit margin on this thing is very small and if we pay for shipping on it, we would sometimes spend more than the profit. The compromise is that we have downrated the shipping size and weight so that our system will only charge you about 40% of the actual shipping cost and we cover the remaining 60%.

Share your knowledge of this product. Be the first to write a review »


Spike Conical CF5, CF10, CF15 LONG Leg Extensions (x3) $77.00
Garden Hose Adapter, Stainless Steel, MGHT x 3/8" Hose Barb $5.00
Carboy Brush $7.75
Triclover Reducer 2" TC x 1.5" TC, Shallow $15.50
NPT Swivel Connector, Cool Touch, 1/2" Female NPT x 5/8" Hose Barb $8.99
Garden Hose Adapter, Stainless Steel, FGHT x 1/2" Hose Barb $5.99
Cable, 10/3 Extension Cord EIGHT FEET (8') Nema L6-30 Male and Female $39.00
CO2 Manifold 3-way Splitter - MFL I/O BH $31.99
Saaz Hop Pellets, 8 OZ $14.29