Home > Equipment > Fittings / Camlocks / Triclover > NPT Threaded Fittings >

Make Weldless Kit *****1/4 in NPT, LOCKNUT, washer, gasket for metal vessels
Make Weldless Kit *****1/4 in NPT, LOCKNUT, washer, gasket for metal vessels
 
Our Price: $7.00

Quantity in Stock:25

Product Code: MWL14LOCK
Qty:

Description
 
Use this kit to turn a 1/4" NPT threaded dial thermometer into its own weldless bulkhead for installing into a tank or kettle. You can buy these parts separately but this is a common combination of parts and the kit is slightly discounted. Includes 9/16" ID, 1/16" thick SS washer, 1/8" thick silicone gasket, and the 1/4" NPS locknut. The locknut does NOT have an oring groove on one side.

The best way to use the kit is leave the SS washer on the thermometer, wrap the threads with plenty of teflon tape, push the thermometer through the hole in your vessle, then apply the gasket and locknut inside.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 5 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome customer service and inventory Thursday, February 23, 2023
Reviewer: Anonymous Person from Boston  
Exactly what I needed. My only place to buy brew hardware from now on. They corrected a small mistake immediately . Thank you!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Tuesday, October 23, 2018
Reviewer: Erik Rottier from Green Bay, WI United States  


Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Just what I needed. Saturday, September 9, 2017
Reviewer: Stephen Lamade from East Northport, NY United States  
I got these to create a seal to the bottom a corny lid, between lid and a washer and lock nut on one side, and a washer and a fixed bolt on the other side. The seal is important because l'm connecting a compression fitting for some tubing that will function as a cooling/heating coil in my fermenter, and I need to keep the fermenter pressurized.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 kettle conversion Monday, June 12, 2017
Reviewer: James Olson from Montross, VA United States  
I recently decided to convert my 20 year old kettle to electric and add some goodies, a thermometer and whirlpool arm. Using the supplies purchased here, the conversion went effortlessly and I saved a lot rather than purchasing an already prepared electric kettle. The online instructions were great! Thanks Jimo.


Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
2 of 5 Not what was advertised Sunday, October 23, 2016
Reviewer: Phil Teetor from Hazel Green, AL United States  
You advertised the 1/4" NPT weldless kit,   nut, washer and seal, saying the nut had a slot/groove for the seal.. the nut sent was flat on both sides, and had a burr in one side I had to file down to make it usable at all.. Not the best advertisement or quality product!!

Was this review helpful to you?



Blichmann Brew Commander Controller - 240V $519.00
19/32" -18 Keg Thread to 1/4" MFL Male Flare Adapter $4.99
Simcoe Hop Pellets, LB $27.50
Golden Promise, Simpsons OZ $0.14
Temp Controller, 240V/50a Brew Buddy II, DIY KIT $999.00
Potassium Bicarbonate 2 oz $2.19
2" TC White PTFE Gasket $2.20
Flavoring, Peanut Butter, 4oz $4.28
1.5 TC x 3/8" Hose Barb $10.00