NPT Swivel Connector, Hexnut, 1/2" Female NPT/NPS x 1/2" Hose Barb

Home > Equipment > Fittings / Camlocks / Triclover > NPT Threaded Fittings >

Our Price: $7.99

Quantity in Stock:1622

Product Code: NPTSWIVELHEXNUT12BARB

Qty:

Description

These Stainless Steel fittings are a hybrid between a traditional NPT fitting and a quick disconnect. The female NPT side is cut a little loose so it will fully thread on to any 1/2" male NPT or NPS fitting to allow the included captured silicone O-ring to seat and seal.

This particular fitting has a straight 1/2" hose barb on the other end which will accommodate 1/2" ID stiff hoses or even 3/8" ID as long as they are stretchy like our 3/8" ID silicone tubing.

Long story short, this is functionally the same as a 1/2 NPT female x 1/2" hose barb but instead of using teflon tape and needing to be tightened on with a wrench, this uses a gasket and can seal well hand tight. It is also more sanitary as your liquid will never touch the threads.

NOTE: This fitting looks A LOT like a tailpiece and beer nut setup that would normally thread on to Sanke keg couplers and faucet shanks (in fact the tailpiece is the same) but the nut is NOT beer thread.

Accessories

Cool Touch Silicone Grip Sleeve for NPT swivel nuts

Our Price: $1.99

Add

Cool Touch Silicone Grip Sleeve for NPT swivel nuts

Share your knowledge of this product. Be the first to write a review »

	Rubber Grommet for Airlock/Bucket Lid $0.89
	Silicone Tubing, Reinforced, by the foot, *1" ID x 1-1/4" OD (1/8" Thick Walls) $5.50**
	American Lager - Extract Ingredient Kit $37.40
	Pressure Transfer Kit, Carboy to Corny Keg, Economy $16.00
	Quick Disconnects (BLQD) Type A90 - MQD x FNPT with 90 degree elbow bend $7.99
	Used Glass Carboy, 6 Gallons $31.00
	PET Keg, 2.2 Gallons (Oxebar brand) $18.99
	SSbrewtech Unitank 2.0 Glycol Jacketed 17 gallon Conical/Unitank Fermenter $1,399.00
	1.5 TC x 1/4" Male NPT THREADS Adapter $9.75