Home > Equipment > Fermentation >

Hop Bong Dry Hopper Kit - 2" TC
Hop Bong Dry Hopper Kit - 2" TC
 
Our Price: $43.99

Quantity in Stock:12

Product Code: HOPBONGKIT2
Qty:

Description
 
The Hop Bong is a versatile pressurizable tri-clamp accessory, capable of dry hopping oxygen purged hops into fermenters. This particular sized tri-clamp Hop Bong was designed for fermenters with a 2" T.C. lid port (actual flange diameter of 2.5"). Note that this can also be used if you have a 1.5" TC port in the lid (2" actual diameter). You'll have to use a bell reducer that goes from 1.5" TC to 2" TC, then attach a 2" Butterfly valve first. The advantage of using this larger 2" TC version of the hop bong is that it will hold more hops than the 1.5" version and hop pellets are much less likely to get stuck bridges across the butterfly valve than it is on the 1.5" butterfly valves. The bell reducer below this 2" valve is usually not a problem at all.
The side port features PCO1881 male threads ( just like 1 and 2 liter soda bottles). We include a ball lock gas fitting that threads on to this side port which will allow you to purge your hops before dropping by flushing them with CO2. We also include the 2" TC x PCO1881 reducer cap for the top of the bong and a matching TC clamp and gasket.
Constructed from Nylon 12: An autoclavable, extremely robust, and chemical resistant engineering plastic.
Hop Pellet Capacity: 150–180g (5.2–6.3 oz)

Usage. Generally you'll have a 2" butterfly valve on your fermenter lid port (or a 1.5 to 2" bell reducer THEN a 2" butterfly valve, then you'll clamp the hop bong on top of that. Fill the hop bong with the dry hops you want to add. TC x PCO cap on to the top. Then thread the smaller black cap on top but leave it loose. Set your CO2 regulator to 1-2psi and connect it to the red ball lock post. Let the top threaded cap leak CO2 for about 60 seconds, then close the cap hand tight. If your fermenter is currently under pressure, adjust your CO2 regulator to approximately match the pressure in the fermenter. Then open the butterfly valve to drop the hops into the fermenter. Close the valve.

Only the items included in the photo are included.



https://youtube.com/shorts/vK4Ur5EaIIg?si=Fb58Rbq5...

https://youtube.com/shorts/vK4Ur5EaIIg?si=Fb58Rbq5l0uqS4tQ

Accessories
1.5 TC Clamp Triclover Concentric Reducer 2" TC x 1.5" TC 1.5 TC EPDM Gasket (for cold side use) 2" TC EPDM Gasket (for cold side use)
Our Price: $7.59

Add
Our Price: $27.99

Add
Our Price: $1.55

Add
Our Price: $1.35

Add
1.5 TC Clamp Triclover Concentric Reducer 2" TC x 1.5" TC 1.5 TC EPDM Gasket (for cold side use) 2" TC EPDM Gasket (for cold side use)
Butterfly Valve, Squeeze Trigger, SS LIGHTWEIGHT, 2" TC ports 2in TC Clamp
Our Price: $58.00

Add
Our Price: $8.00

Add
Butterfly Valve, Squeeze Trigger, SS LIGHTWEIGHT, 2" TC ports 2in TC Clamp

Share your knowledge of this product. Be the first to write a review »


Nema L14-30P Twist Lock Cord Plug for 4-wire 240v, 30 amps $12.99
Golden Promise, Simpsons OZ $0.14
Quick Disconnects (BLQD) Type C - FQD x 1/2" Hose Barb $10.00
Centennial Hop Pellets, LB $22.00