Butterfly Valve, Squeeze Trigger, SS LIGHTWEIGHT, 1.5" TC ports

Home > Equipment > Fittings / Camlocks / Triclover > Triclover >

Alternative Views:

Our Price: $55.00

Quantity in Stock:102

Product Code: TC15_BUTTERFLY_SS_LIGHT

Qty:

Description

This 304 stainless steel valve has 1" / 1.5" TC flanges on both ends The bore is exactly 1-3/8". There are many like it but this one is our favorite because it hasn't been built to withstand a an entire nuclear apocalypse (just the first blast). It's about 30% smaller in bulk and nearly 50% of the weight (824 grams vs 1435 grams) than a typical industry standard butterfly valve because it can be. You can get an idea of the scale in our second picture as compared to the plastic handle version we sell.

The valve can be locked into several positions at various degrees of "open". To unlock the handle to turn the valve, the trigger is squeezed. This is a very nice valve and the best we've seen at this price point. If you don't know what a butterfly valve is or how it differs from ball valves, essentially the closure is made by a thin rotating disc. In the closed position, the disc is perpendicular to the flow and rubs against surrounding silicone seals to stop flow. In the open position, the disc is parallel to flow and almost disappears for minimal restriction. There are no pockets behind the seals that get funky either.

An important note about chemicals. Do not leave these valves soaking in strong detergents, acids or caustic solutions for days at a time. Silicone is a great choice for seals in hot and food grade applications but it will shrink over time after long chemical exposures. A shrunken seal is a leaking butterfly valve and they are not cheap to replace.

Accessories

Heat Shield Large sideways clip for Ball Valves

Cleaning Brush, 3/4" diameter

Our Price: $10.00

Add

Our Price: $3.85

Add

Average Rating: Average Rating: 5 of 5

5 of 5 Total Reviews: 3 Click Here to Write a Review »

0 of 0 people found the following review helpful:

Perfect	Friday, July 31, 2026
Reviewer: jangus13 from Denison, TX United States

This valve is the perfect combination of strength and refinement. Homebrewers are not industrial sanitation crews, everyone tends to treat their own equipment better. No need to make homebrew equipment capable of withstanding hourly nightshift worker abuse often seen in the food industry. This valve takes up less room, weighs less (won't tip your kettle over) and does the same job. Good job on this one!

Was this review helpful to you?

0 of 0 people found the following review helpful:

Nice valves	Monday, November 7, 2022
Reviewer: Marc from Baden, PA United States

These valves are great because they are lighter and easier to attach to triclamp fixtures. This is especially true for hose ends. Large brewery hoses are stiff and unwieldy, having a lighter valve makes these connections a little easier. Brew Hardware is great. If you need something special, even custom Bobby and crew will try to help you. Great job.

Was this review helpful to you?

0 of 0 people found the following review helpful:

No more ball valves	Monday, October 17, 2022
Reviewer: Jose R Espinosa from Easley, SC United States

My ss brew tech fermenter definitely needed some upgrades. The butterfly valve is so much nicer and cleaner than a three piece ball valve and it doesn’t have a hidden air pocket built in the way ball valves have around the seals.

Was this review helpful to you?

	1" TC Instrument TEE $19.00
	Pressure Release Valve (PRV) Fixed 35psi, 1/4" NPT Thread $15.99
	Steam Slayer Install Kit for All Anvil Foundry All in Ones $82.00
	Fermonster 3 Gallon PET Widemouth PORTED Fermenter $25.50
	Stainless Oxygen (O2) .5 Micron Diffusion Stone with 1/2" NPT threads $13.99
	Omega Yeast OYL-001 ALT Altbier (Compares to WY1007 and WLP036) 150ml Liquid Slurry $10.99
	RIMS Hardware Kit 12" Body Length - 1/2" Male NPT I/O Ports $149.00
	Cable, 10/4 Cord (4ft) with Nema 14-30P Male Plug $31.99
	Sight Calibration Decals 5-200 in increments of 5 $8.00