Home > Equipment > Kegging Parts > Beer Side, Faucets etc >

1.5" TC to Female Beer Thread Adapter
1.5" TC to Female Beer Thread Adapter
 
Alternative Views:
Our Price: $13.99

Quantity in Stock:70

Product Code: TC15XFEMALEBEERTHREAD
Qty:

Description
 
These fittings give you 1.5" TC Triclover ports on any beer thread fitting. The primary usage would be to create a Sanke Keg cleaning system based of a pump and hoses that already use TC flanges.

The fitting is shown threaded on to the beer out port of a Sanke coupler, but the coupler is not included obviously. In order to pump into the beer out of a Sanke coupler, you will need to remove the check ball from inside.

The fitting ships with a silicone oring installed.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 3 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Awesome Monday, February 26, 2024
Reviewer: John Stephens from Royse City, TX United States  
Enjoy reading the wrapping paper from another state. 😂

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Game changer! Tuesday, April 20, 2021
Reviewer: Not from around here  
This is exactly why I shop here.  This is a pretty specialized part, but if you need it, where else could you possibly find it?!  Since I was modifying  an AerVoid beverage dispenser to become a mash tun, this was the missing link.  Thanks, Bobby!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
3 of 5 Nice, but threaded section too long for coupler Monday, November 25, 2019
Reviewer: Justin from Canada  
Seems like a good fitting. The larger bore + o ring design maximizes flow rate - ideal for keg cleaning and filling applications. The threads match well with the couplers I've tried. My only issue is that the threaded section is a bit too long and the fitting can not be installed far enough to compress the o-ring on some couplers I've tried. I hope to remove 3/8" from the threaded section or so, so I can use it as intended.

BrewHardware.com Response: That is very odd. They work for all the coupler types we have handy in the shop.  I'm sure there are a few odd designs out there.

Was this review helpful to you?



1.5 TC x 3/4" Male NPT THREADS Adapter $13.00
Swivel Flare Adapter - 1/4" FFL x 90 degree 1/4" OD hose barb $2.49
Stainless Oxygen (O2) .5 Micron Diffusion Stone with 1/4" MFL $11.99
Quick Disconnects (BLQD) Type GHA - MQD x Female Garden Hose $9.00
Flavoring, Natural, Grapefruit, 4oz $4.68
NPT Threaded Elbow, 90 Degrees, F/F $3.00
Oktober Anytime (Octoberfest Lager) - 5 Gal All Grain Recipe Kit (Marzen Octoberfest) $26.40
Flaked Corn (Maize) LB $2.20
Blichmann Autosparge Float Extension 9" $9.99