Home > Equipment > Mashing >

Blichmann LARGE HERMS Coil (aHERMSCoil-L)
Blichmann LARGE HERMS Coil (aHERMSCoil-L)
 
Our Price: $163.00

Quantity in Stock:(Out of Stock)

Product Code: BLICHMANNHERMSL
Qty:

Description
 
The Blichmann large weldless HERMS coil has less overall tubing length (31 feet) than our BrewHardware HERMS coils (53 feet) but it is offered at a better value considering that it has weldless fittings already attached to the coil.
  • Dimensions: 9.50" Tall x 10.375" Diameter
  • Fittings Dimensions: 9.50" Length
  • Connections: 1/2" NPT
  • Includes: Two 1/2" Elbow QuickConnector fittings

We prefer using a ball valve on the lower ports of HERMS coils to allow hose disconnect without fully draining the coil. If you want to do that, keep in mind you'll need to add a hex nipple on the outside of the valve to use the included quick connectors. We also prefer camlock fittings for faster connections and if you go that route, use a camA on the top port of the coil and a camF on the lower port after the recommended ball valve.


If you would like us to install this coil in either a pot you bring in to the shop or one you plan on buying from us for shipping, simply add quantity two of the labor charge found in the accessories list to the right. Unless you tell us otherwise, we mount the ports at the pot's 5 o'clock position, just to the right of the drain, as low as possible.

Accessories
Labor Charge - Drill Hole and Install Weldless Component Camlock Quick Disconnects - Cam F 2-piece (2pc) Ball Valve, 1/2" NPT, F/F Premium Camlock Quick Disconnects - Cam A
Our Price: $9.00

Add
Our Price: $4.50

Add
Our Price: $13.99

Add
Our Price: $4.25

Add
Labor Charge - Drill Hole and Install Weldless Component Camlock Quick Disconnects - Cam F 2-piece (2pc) Ball Valve, 1/2" NPT, F/F Premium Camlock Quick Disconnects - Cam A
Hex Nipple, 1/2" NPT PREMIUM LOOSE Blichmann Gasketed 1/2" NPT to 1.5" TC adapter (BE-500022-00)
Our Price: $5.99

Add
Our Price: $15.99

Add
Hex Nipple, 1/2" NPT PREMIUM LOOSE Blichmann Gasketed 1/2" NPT to 1.5" TC adapter (BE-500022-00)

Share your knowledge of this product. Be the first to write a review »


Pilsner Malt German, Avangard OZ $0.12
Flaked Corn (Maize) OZ $0.14
Temp Controller, 240V/30a SPIKE BREWING SINGLE ELEMENT (SOLO) $690.00
Ball Lock Keg Disconnect ALL STAINLESS - Gas Side - Male Flare MFL $16.99
Oak, American Spirals, Heavy Toast, 8" 2 pack $9.89
Glass Carboy, 6 Gallons, Italian Made $59.00
Flat Silicone Gasket for 1/2" NPT, bulkheads, LTS sight kits, etc (13/16" ID x 1.25 OD) $1.45
Anvil Bucket Fermenter - 4 Gallon (ANV-FV-4gal) $143.00
Melanoidin, Weyermann LB $2.20