Home > Equipment > Electric Brewing > Kettle Element Enclosures >

Hot Pod Kettle Element Enclosure ETC4WF - TC1.5" Enclosure w/clamp, gasket, weld ferrule
Hot Pod Kettle Element Enclosure ETC4WF - TC1.5" Enclosure w/clamp, gasket, weld ferrule
 
Our Price: $46.00

Quantity in Stock:(Out of Stock)

Product Code: ETC4WF
Qty:

Description
 
Electric Kettle Enclosure with 1.5" TC flange, gasket, clamp and Medium Weld Ferrule .

This specific unit features an enclosure with a 1.5" TC (triclover) flange welded. It assumes you want to weld the included 1.5" TC weld ferrule to your vessel. We have other kits with various accessories included elsewhere on this site. Note: we also developed a way to install this weld ferrule into kettles by pulling a flare using our new TC flare tool as shown in the accessories and finishing with silver solder.


General info for all TC (triclover) based electrical enclosures:

The matter of enclosing the electrical connection of your heating element has long been the shortcoming of many Do-It-Yourself element installs. Many solutions relied on "potting" the exposed connections with silicone or epoxy which was a bit more permanent than practical. In addition to shielding the connections, another challenge is providing an earth ground point on the metal pieces. Our design solves both of these problems in an aesthetically pleasing and functionally adequate way. We have several options depending on whether you want to weld, solder or use gaskets to install your heating elements.
What's included with all enclosure options:
  • Screw-together canister with ground screw and cord grip.
  • Electrical Connection Parts: One pair of crimp-on ring terminals to connect your cord (up to 10 gauge wire) to the element, and a single ring terminal to attach an earth ground to the canister, a couple pieces of shrink wrap tubing (shrink it over your crimp terminals with a lighter).
Note!! electric heating element is NOT included with ANY of these kits.

The cord grip included with this kit will accommodate nearly any practical cord diameter from 14/3 SJ to 10/3 SJ cords.

Accessories
Heating Element, Threaded, 1650 watt, 120v, All Stainless Steel Heating Element, 5500 watt THREADED, All Stainless Steel Install Tool (pull through flaring) for 1.5" TC Weld Ferrules Silver Solder Kit (Harris Stay-Brite 8 and Stay-Clean Flux)
Our Price: $29.00

Add
Our Price: $39.00

Add
Our Price: $29.99

Add
Our Price: $12.99

Add
Heating Element, Threaded, 1650 watt, 120v, All Stainless Steel Heating Element, 5500 watt THREADED, All Stainless Steel Install Tool (pull through flaring) for 1.5" TC Weld Ferrules Silver Solder Kit (Harris Stay-Brite 8 and Stay-Clean Flux)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 8 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 2nd one in the past 5 years Monday, May 2, 2022
Reviewer: John Waggoner from Clinton Township, MI United States  
I received one as part of a RIMS tube, and now just the Hot Pod on it's own.  Directions are very good, just make sure you follow them for the ground!  Already did a test and everything works great and no leaks!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent product Monday, March 23, 2020
Reviewer: David Marchinko from WINDSOR, ON Canada  
Nice looking, easy to wire , great quality . Works exactly as advertised .

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Much better solution for an enclosure. Thursday, November 5, 2015
Reviewer: Jay Williams from Sparks, NV United States  
I didn't like the junction box style enclosures. I wanted to keep my shiny rig shiny. I also wanted to mount this as low as possible and didn't want to have to worry about unscrewing the element to take it out hence the tri-clamp. When it arrived, I knew I made the right choice. This is going to look amazing and work perfectly.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great product - fast shipment Wednesday, September 23, 2015
Reviewer: Chris McFarland from Spokane Valley, WA United States  
Everything about this order was perfect.  The product is exactly what I wanted and is made from high quality materials.  Welded it into my keg and will be brewing beer this weekend.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 A perfect solution for heating element Monday, April 20, 2015
Reviewer: Joseph S Russo JR from Maynard, MA United States  
This is the perfect solution for the heating elements of my home brewing system. Delivery was fast.

Was this review helpful to you?

View All Customer Reviews


How to Brew Book 2017 $18.00
Brewbuilt X3 Glycol Jacketed 14 gallon Conical/Unitank Fermenter $1,299.00
The Complete Meadmaker Book $16.95
1.5" TC to Faucet $19.99
Omega Yeast Pilsner 1 OYL-101 (similar to WY2001 WLP-800) 150ml Liquid Slurry $10.99
Blichmann Hop Rocket Hopback $149.00
Perle Hop Pellets, OZ $2.15