Home > Equipment > Fittings / Camlocks / Triclover > NPT Threaded Fittings >

NPT Swivel Connector, Hexnut, 1/2" Female NPT x 90 degree 5/8" Hose Barb
NPT Swivel Connector, Hexnut, 1/2" Female NPT x 90 degree 5/8" Hose Barb
 
Our Price: $10.99

Quantity in Stock:(Out of Stock)

Product Code: NPTSWIVELHEXNUT58BARB90
Qty:

Description
 
These Stainless Steel fittings are a hybrid between a traditional NPT fitting and a quick disconnect. The female NPT side is cut a little loose so it will fully thread on to any 1/2" male NPT fitting to allow the included captured silicone O-ring to seat and seal.

This particular fitting has a 90 degree 5/8" hose barb on the other end which will accommodate 1/2" ID hoses as long as they are stretchy like our 1/2" ID silicone tubing. This option provides the maximum flow since the barb is a full 1/2" ID. It also doesn't require a hose clamp

The other great application for this fitting is for a dip tube on the inside of your kettle when your bulkheads already have male threads on the inside. This fitting will provide a drop of about 2.5" from the centerpoint of your male NPT fitting. It can be rotated at an angle for less height or simply trimmed.

Accessories
Cool Touch Silicone Grip Sleeve for NPT swivel nuts
Our Price: $1.99

Add
Cool Touch Silicone Grip Sleeve for NPT swivel nuts

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 5 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Wednesday, March 24, 2021
Reviewer: Paul Aldrich from St. Augustine, FL United States  
Perfect fit . Replaced the coupling on the   inside of kettle to add a pickup tube

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Excellent quality Monday, February 4, 2019
Reviewer: Jed M. from UT United States  
I picked up two of these high quality SS connectors as wort pick ups for my MT and HLT. They were shipped and arrived quickly and as always Brewhardware was my reliable source for what I needed.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 kettle conversion Monday, June 12, 2017
Reviewer: James Olson from Montross, VA United States  
I recently decided to convert my 20 year old kettle to electric and add some goodies, a thermometer and whirlpool arm. Using the supplies purchased here, the conversion went effortlessly and I saved a lot rather than purchasing an already prepared electric kettle. The online instructions were great! Thanks Jimo.


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fits my needs Sunday, April 23, 2017
Reviewer: Joseph Ewick from Shrewsbury, MA United States  
Versatile fitting and very happy with its functionality.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great! Saturday, February 25, 2017
Reviewer: Dan Ledbetter from Rio Rancho, NM United States  
Awesome!

Was this review helpful to you?



Used Italian 6 Gallon Glass Carboy $39.00
1/4" MFL Male to 1/4" MFL Male Flare Coupling $3.00
Brew Built 15g FB Silicone Edge Gasket $13.49
Make Weldless Kit 1/2" NPT, For Thermowells $5.00
3000ml Erlenmeyer Flask for Starters $29.95
Roasted Barley (300L), Briess OZ $0.14
Butterfly Valve, Squeeze Trigger, SS LIGHTWEIGHT, 1.5" TC ports $55.00
Thermowell - Heavy Duty - Double Thread 1/2" M/FNPT x 8" Depth $19.00
Tube Cleaning Brush, 1/2" diameter, 66" long $8.99