Home > Equipment > Keg, Pot, Cooler Parts > Thermometers >

Dial Thermometer - 3" face, 2.5" Probe, 1/2" NPT
Dial Thermometer - 3" face, 2.5" Probe, 1/2" NPT
 
Our Price: $24.00

Quantity in Stock:(Out of Stock)

Product Code: THERMOT325
Qty:

Description
 
Our current stock of these thermometers are made by Miljoco and are branded as such (does not have the BrewHardware logo on the front). They carry a 5 year warranty and feature a stainless steel probe and casing with a glass face. The thermometer is recalibratable via a screw on the back. The range goes from 0 to 250 degrees F and also has a Celsius scale. Accuracy is plus or minus 2F like all bimetal thermometers. The back features male 1/2" NPT thread for mounting into plumbing or into a welded bung in your pot. To turn this into a weldless install, drill a 13/16" hole in your pot and use the "Make Weldless 1/2" Locknut kit" seen in the accessories list. If you are installing into a pot that will be direct fired over a high BTU outdoor cooker, you must install a heat shield to retain warranty. We will not honor claims for exterior damage or condensation problems if you have not purchased a heat shield.

Accessories
Heat Shield small, for threaded in 1/2" NPT dial thermometers. Make Weldless Kit 1/2 in NPT, LOCKNUT, washer, gasket for metal vessels Heat Shield small for weldless 1/2" NPT thermometers e.g. WLT325, WLT34, WLT36.
Our Price: $10.00

Add
Our Price: $7.00

Add
Our Price: $10.00

Add
Heat Shield small, for threaded in 1/2" NPT dial thermometers. Make Weldless Kit 1/2 in NPT, LOCKNUT, washer, gasket for metal vessels Heat Shield small for weldless 1/2" NPT thermometers e.g. WLT325, WLT34, WLT36.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 13 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Sunday, August 26, 2018
Reviewer: Brian Conradt from NOBLESVILLE, IN United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Ok Thursday, December 29, 2016
Reviewer: Jackson Camacho from Guayaquil, Guayas Ecuador  
Todo muy bien, rápido y seguro. 100% recomendable.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 A+ as always Thursday, December 1, 2016
Reviewer: Travis Johnson from Milton, VT United States  
Quality thermometer, I was hoping there would be a brew hardware logo on the face, but not a game changer.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Good once calibrated Saturday, May 21, 2016
Reviewer: Jason Floor from Scottsdale, AZ United States  
Be sure to calibrate your thermometer! One of mine was calibrated perfectly, and the adjustment screw worked well on it. The other one I got was off about 5 degrees(using the boiling water method) and I had to calibrate it, and the screw was really stiff and only adjusted the dial in one direction so I had to rotate the dial a little less than 360 degrees each time since it would only turn one way.  They both work perfectly though after calibration.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Put on a happy face! Saturday, March 12, 2016
Reviewer: Mark Kutil from Germantown, TN United States  
The dial is bright, easy to read, and well marked. Fully adjustable for proper calibration. The short probe is perfect for my mash tun and won't interfere with the mesh bag when doing a BIAB batch. Love it.

Was this review helpful to you?

View All Customer Reviews


Obidiah Poundage (English Robust Porter) - 5 Gal All Grain Recipe Kit $28.60
Spike Flex BLACK Jacket $104.50
Spike Carb Stone $101.00
Rack and Fill Kit - 3/8" $19.00