Home > Equipment > Kegging Parts >

Bevlex Thickwall PVC Tubing, 3/16" ID X 7/16" OD (per foot)
Bevlex Thickwall PVC Tubing, 3/16" ID X 7/16" OD (per foot)
 
Our Price: $0.52

Quantity in Stock:317

Product Code: PVCTHICKWALLTUBING316
Qty:

Description
 
This 3/16" ID tubing is suitable for use between your kegs and faucets and will fit over 3/16" or 1/4" hose barbs and tailpieces. If you're using this for serving beer out of kegs, you should be using approximately 10 feet of tubing per faucet for controlled foam free pours. If you'd like shorter lines, check out our 4mm ID EVAbarrier tubing.

All tubing is sold by the foot. If you want 10 feet, order quantity 10.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 4 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Well Made Saturday, February 27, 2021
Reviewer: S. Ruben from Woodstock, IL United States  
Seems well made and flexible

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Just what I needed. Sunday, October 6, 2019
Reviewer: Chris from Bridgeport, AL United States  
The tubing is just what I needed for extending my beer lines. Works great. Shipping was unbelievably fast, from the time I ordered to delivery was 3 days. Will by from again!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great hose Friday, March 29, 2019
Reviewer: Jim Lewis from Troy, NY United States  
I bought a used kegerator, a couple years old and never cleaned, so I replaced all the hoses with this.  It works well, is flexible, doesn't collapse—  what more do you want?

BTW, hose is supposed to be tight on the fittings.  I nuked a cup of water and dipped the ends first, which got it over 1/4" & 5/16" barbs.  You still have to use a hose clamp or oeteker to be sure.  To take it off, a heat gun.  No problems!

Was this review helpful to you?

  0 of 1 people found the following review helpful:
 
3 of 5 Tight fit Sunday, September 30, 2018
Reviewer: Chuck Sidelinger from Du Bois, PA United States  
It was very tight getting the hose over the 1/4" hose barbs. A heat gun helped with that.

Was this review helpful to you?



NPT Swivel Connector, Hexnut, 1/2" Female NPT/NPS x 1/2" Hose Barb $7.99
Keg Jacket 5 Gal- Neoprene Insulation Sleeve/glove $16.99
BrewHardware Insulated Glycol Tubing Kit for Jacket Fermenters (TC PORTS) $159.00
Pilsner Malt (HANA), Crisp LB $2.72
1.5 TC x 3/8" Hose Barb 90 Elbow $13.00
Foxx High Alkaline Line Cleaner (stronger than BLC) (32 Oz) $12.99
Blichmann Weldless Plug Assembly(1/2" actual hole measurment) $9.00
Potassium Metabisulfite 2 oz $2.19
Stainless Oxygen (O2) .5 Micron Diffusion Stone with 1/4" MFL $11.99