Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-200 in increments of 5
Sight Calibration Decals 5-200 in increments of 5
 
Our Price: $8.00

Quantity in Stock:18

Product Code: CAL5-200
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


1.5 TC x 13/16" Hose Barb (best for 3/4" ID Silicone) $10.99
7.8 Gallon Bucket Only $19.00
Buon Vino Super Jet Filter Pads - 3-pack Fine (Number 2) $6.99
Vintage Shop Super Transfer Pump Self Priming Diaphragm $199.00
Munich Dark (15L), Avangard LB $1.72
BTF Iodophor Iodine Based No-Rinse Sanitizer (similar to IO Star), 32oz $29.99
Quick Disconnects (BLQD) Type A - MQD x FNPT $8.00
EZ Cap 500ml Amber Flip Top Bottles, Case of 12 $29.99
Stainless Oxygen (O2) .5 Micron Diffusion Stone with 1/4" MFL $11.99