Home > Equipment > Fittings / Camlocks / Triclover > Camlock Quick Disconnects >

Male Camlock Socket Weld/Solder for 3/8" OD tubing
Male Camlock Socket Weld/Solder for 3/8" OD tubing
 
Our Price: $7.00

Quantity in Stock:3

Product Code: CAMSOLDER38
Qty:

Description
 
This fitting allows you to very cleanly add a 1/2" male camlock onto the end of a piece of 3/8"" OD copper or stainless tubing. The fitting is bored all the way through with 3/8" so it will slide all the way over a piece of 3/8" tubing. You can silver solder it in place.

This is a fantastic way to convert a section of hard piped plumbing to a camlock enable hose connection or to create custom carboy fillers, racking canes, whirlpool arms etc. How about converting your immersion chiller in/out ports to camlock for each quick disconnect?

This item is for the camlock fitting itself. We also offer this fitting combined with a labor charge for TIG welding it to a piece of tubing of your choosing. See elsewhere on the site. The photo is showing what the fitting looks like attached to two different sizes of tubing.

If you plan to solder these, please keep in mind that stainless steel requires a special flux and regular paste flux that you use on copper will not work. We sell an inexpensive kit that contains the correct flux.

If you need a cam on the end of tubing, this is our favorite way to get there. If you're not comfortable with silver soldering the next best thing would be our special camlock to compression adapters:

Accessories
Racking Cane, Stainless Steel, 5/8" OD Tubing, 29" Length Racking Cane, Stainless Steel, 1/2" OD Tubing, 29" Length Silver Solder Kit (Harris Stay-Brite 8 and Stay-Clean Flux) Silver Solder Stay Brite #8 HALF OUNCE 1/16" diameter
Our Price: $18.00

Add
Our Price: $15.00

Add
Our Price: $12.99

Add
Our Price: $7.00

Add
Racking Cane, Stainless Steel, 5/8" OD Tubing, 29" Length Racking Cane, Stainless Steel, 1/2" OD Tubing, 29" Length Silver Solder Kit (Harris Stay-Brite 8 and Stay-Clean Flux) Silver Solder Stay Brite #8 HALF OUNCE 1/16" diameter
Racking Cane, Stainless Steel, 1/2" OD Tubing, 23" Length Custom Stainless Tubing with optional Bends
Our Price: $13.00

Add
Our Price: $5.00

Add
Racking Cane, Stainless Steel, 1/2" OD Tubing, 23" Length Custom Stainless Tubing with optional Bends

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Tuesday, April 13, 2021
Reviewer: Jorge from Mayaguez, PR United States  
Works great on cooper inmession wort chiller

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Wednesday, June 20, 2018
Reviewer: Adam Garrison from Enterprise, AL United States  


Was this review helpful to you?



Plastic Spoon, 24" $5.00
Nectaron (NZ) Hop Pellets, LB $37.40
PBW, 4 LBs Powdered Brewery Wash $29.70
Sanke Type D or S Cleaning Jumper Cap $10.99
Tap Handle, Oak Paddle with Chalk Board $12.99
Mash and Boil Gasketed Lid $23.00