Home > Equipment > Tools / Accessories > Gaskets >

Flat Silicone Gasket for 1/2" NPT, bulkheads, LTS sight kits, etc (13/16" ID x 1.25 OD)
Flat Silicone Gasket for 1/2" NPT, bulkheads, LTS sight kits, etc (13/16" ID x 1.25 OD)
 
Our Price: $1.45

Quantity in Stock:224

Product Code: GASKET12NPT
Qty:

  
Description
 
We have these 1/8" thick flat gaskets custom cut and we use them for all bulkheads and make-weldless kits for 1/2" NPT threaded components. These are much more forgiving to over tightening situations where orings would just deform out of position. These are FDA approved for food contact and will withstand temps of up to 400F. Add 10 of these to your cart and you'll get 20% this item.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 15 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Gasket Monday, May 13, 2024
Reviewer: Anthony Scardaville from Bridgeville , DE United States  
Well made gaskets!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 A little tight but that's never a bad thing!!! Friday, September 15, 2023
Reviewer: Rumpleicious Brewing from NC  
Had orings starting to leak and deform.  Read from others that these were a tight fit...and they are.  Put outer ring on and pulled outer edges while pushing down to seat.  Seemed that screwing the inner seal onto the post (after you pry it on) works best.  Keep turning until it is realatively close to the kettle walls.  I hand tightened the nut as much as possible and gave it about another turn with a large wrench.
Filled pots up for testing and noticed 1. no leaks even while moving the valve around to simulate usage and 2. MUCH more stable feel to the valve.  Was kinda loose feeling before because the orings are so soft and you cant tighten them much w/o deforming the oring.  I put a fair bit of torque on these and NO deforming!  I ordered extra in case the tight fit causes wear but I'll take that thight fit over leaks on boil day anyday!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Great Quality Monday, December 21, 2020
Reviewer: Miguel Zavala from Villa Park, IL United States  
The washers are of great quality, easy to use, and help prevent leaks.  Remember not to over tighten!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Friday, January 26, 2018
Reviewer: Patrick Rineman from Howell, MI United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Fits my needs perfectly Saturday, September 9, 2017
Reviewer: Stephen Lamade from East Northport, NY United States  
It's a known quality so I bought this as an extra because you never know when a project will come up in the future.

Was this review helpful to you?

View All Customer Reviews


2Row Brewer's Malt RAHR 55 LB Sack $67.10
Maris Otter (Floor Malted No.19), Crisp LB $1.89
Bevlex CLEAR Thickwall PVC Tubing, 5/16" ID X 9/16" OD (per foot) $0.52
Keg Jacket 5 Gal- Neoprene Insulation Sleeve/glove $16.99
1/2" NPT to 3/8" OD Tube Compression Elbow $15.00
Spike All In One PRV/Spunding $179.50
CO2 Regulator, KOMOS Single Pressure, 0-50psi $64.99
Push Fit Fitting Duotight - 5/16 (8mm) OD Tube x 1/4" OD Tube Reducer $2.89