Home > Equipment > Electric Brewing > Kettle Element Enclosures >

Hot Pod Kettle Element Enclosure 2ETC 2"TC enclosure ONLY
Hot Pod Kettle Element Enclosure 2ETC 2"TC enclosure ONLY
 
Our Price: $36.00

Quantity in Stock:48

Product Code: 2ETC
Qty:

Description
 
Electric Kettle Enclosure with 2" TC flange, no gasket or clamp.

This specific unit features an enclosure with a 2" TC (triclover) flange welded. It assumes you already have a 2" TC flange welded to your vessel and that you will provide a 2" silicone TC gasket and clamp. We have other kits with various accessories included elsewhere on this site.


General info for all TC (triclover) based electrical enclosures:

The matter of enclosing the electrical connection of your heating element has long been the shortcoming of many Do-It-Yourself element installs. Many solutions relied on "potting" the exposed connections with silicone or epoxy which was a bit more permanent than practical. In addition to shielding the connections, another challenge is providing an earth ground point on the metal pieces. Our design solves both of these problems in an aesthetically pleasing and functionally adequate way. We have several options depending on whether you want to weld, solder or use gaskets to install your heating elements.
What's included with all enclosure options:
  • Screw-together canister with ground screw and cord grip.
  • Electrical Connection Parts: One pair of crimp-on ring terminals to connect your cord (up to 10 gauge wire) to the element, and a single ring terminal to attach an earth ground to the canister, a couple pieces of shrink wrap tubing (shrink it over your crimp terminals with a lighter).
Note!! electric heating element is NOT included with ANY of these kits.

The cord grip included with this kit will accommodate nearly any practical cord diameter from 14/3 SJ to 10/3 SJ cords.

Accessories
Heating Element, 5500 watt THREADED, All Stainless Steel Cable, 12/3 SJEOOW High Temp Portable Power Cable by the foot Cable, 10/3 SJEOOW High Temp Portable Power Cable by the foot Heating Element, Threaded, 1650 watt, 120v, All Stainless Steel
Our Price: $39.00

Add
Our Price: $1.95

Add
Our Price: $2.75

Add
Our Price: $29.00

Add
Heating Element, 5500 watt THREADED, All Stainless Steel Cable, 12/3 SJEOOW High Temp Portable Power Cable by the foot Cable, 10/3 SJEOOW High Temp Portable Power Cable by the foot Heating Element, Threaded, 1650 watt, 120v, All Stainless Steel

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 11 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 hotpod Wednesday, July 15, 2026
Reviewer: Curtis  
all worked well the ground wire is a bit of a chore to connect but worked out followed the directions and it went together want to thank the people there ! MY questions got answered and everyone we easy to deal with and very nice thank all of the staff. curtis

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Element Enclosure Thursday, September 29, 2022
Reviewer: Mark from Everett, WA United States  
Well made with great instructions! A must have!

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 Excellent Friday, June 11, 2021
Reviewer: John Jones from Bonita Springs , FL United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Thursday, September 6, 2018
Reviewer: Robert Owensby from Columbus, OH United States  
Exactly as described super easy to install

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
4 of 5 Great Product Friday, February 17, 2017
Reviewer: Brian from VA- United States  
I have seen other heat element enclosures out there, but these are definitely more compact and looks a lot cleaner on my kettle.  Very easy to wire with all required items included.  No leaks and solid.  One issue is the light skin on the side of the grounding screw.  The housing can bend if not careful on the amount of pressure you apply to the screw.  If this was fixed it would definitely be a 5 star review.  Fast shipping as well with the element enclosure packed extremely well!  Will be buying from Brewhardware.com again!

Was this review helpful to you?

View All Customer Reviews


Heat Shield small, for threaded in 1/2" NPT dial thermometers. $10.00
Bayou Classic Model 1060 - 62qt Kettle $112.00
Briess DME Traditional Dark 1 lb Bag (Extract) $5.50
Mini-Ball Valve - 1/2" NPT Male/Fem $14.00
Rubber Stopper, Solid, #6 $0.65