Home > Equipment > Fermentation >

Duotight Flow Stopper Automatic Keg Filler
Duotight Flow Stopper Automatic Keg Filler
 
Our Price: $14.99

Quantity in Stock:9

Product Code: KEGFLOWSTOPPER
Qty:

Description
 
The Duotight Flow Stopper is a handy devicie to use while filling kegs or when transferring between kegs during filtering or after fining. Simply attach the Flow Stopper to the gas post of your keg, then when the keg is full it will automatically cut off flow and prevent excess beer from exiting your gas post and spilling onto the floor.
For even better results, we recommend using the Flow Stopper with the BlowTie Spunding Valve as shown in the accessories list to the right. When attached to the output port of the flow stopper the BlowTie will enable you to apply head pressure to the keg, meaning you can control the flow speed and reduce the foam generated in the filling process. You will need a short length of 8 mm OD EVABarrier tubing to connect the BlowTie to the outlet of the Flow Stopper.
Includes:
  • 2 x Duotight 8 mm x 5/8" FPT (DUO104)
  • 1 x Duotight 8 mm elbow (DUO107)
  • 1 x Duotight 8 mm x 1/4 in. flare (DUO106)
  • 1 x Ball float
  • 1 x Stainless spring
  • 2 x 8 mm OD EVABarrier joiners
  • 1 x Acrylic sight glass
Note that the stainless steel ball valve QD we list in the accessories is the best choice because the male flare port is horizontal which will keep the keg flow stopper facing upright.
Ball lock fitting and BlowTie spunding valve not included.

Accessories
Blowtie Variable Pressure Relief Valve (Spunding) with 0-15 psi gauge and Push Fit Connections Ball Lock Keg Disconnect ALL STAINLESS - Gas Side - Male Flare MFL
Our Price: $19.99

Add
Our Price: $16.99

Add
Blowtie Variable Pressure Relief Valve (Spunding) with 0-15 psi gauge and Push Fit Connections Ball Lock Keg Disconnect ALL STAINLESS - Gas Side - Male Flare MFL

Share your knowledge of this product. Be the first to write a review »


Sight Calibration Decals 5-300 in increments of 5 $9.00
Brew Built 15g FB Silicone Edge Gasket $13.49
1.5" TC to PCO1881 Soda Bottle Thread, Plastic $4.25
White Wheat Malt, Rahr or Briess OZ $0.10