Home > Equipment > Kegging Parts >

Weldless Bulkhead with Ball Lock Gas
Weldless Bulkhead with Ball Lock Gas
 
Our Price: $14.99

Quantity in Stock:46

Product Code: BULKHEADBLG
Qty:

Description
 
We know our loyal customers have been looking for this one for a while and we're happy to have finally developed a version that works like a charm.

This assembly allows you to install a corny keg style ball lock gas post into anything with a wall up to 3/16". The main body of the fitting has 19/32" keg post thread on one side and 1/4" NPT on the other. The large center hex provides a great backup for the included silicone oring and even features a recessed groove to keep the oring contained just like our line of true bulkheads.

This assembly includes everything in the picture.
Note that this assembly does not support the insertion of a standard keg diptube. The bore is a little too small and just wasn't designed for that use.

Install instructions:
Drill and deburr a 9/16" diameter hole.
Insert the 1/4" NPT side of the fitting through the hole.
Thread the locknut down the threads and tighten up with a wrench on both sides.

WARNING: These parts could potentially be misused to pressurize a vessel that is not rated for pressure applications and we are adamantly advising customers to take caution and not to do this. Any sealable vessel that has a way to add pressurized gas should also have a non-defeatable pressure relief valve or similar safety mechanism.

Metal is 304SS and the rubber parts are silicone

Accessories
Liquid Side Ball Lock Keg Post (19/32" - 18 thread) with Universal Poppet Gas Side Ball Lock Keg Post (19/32"-18) with Universal Poppet
Our Price: $7.25

Add
Our Price: $7.25

Add
Liquid Side Ball Lock Keg Post (19/32" - 18 thread) with Universal Poppet Gas Side Ball Lock Keg Post (19/32"-18) with Universal Poppet

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 16 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Top Notch Fitting Monday, March 16, 2026
Reviewer: Mick Whelan from Burnsville, MN United States  
Exactly what I needed to make a custom blow off trap when filling my kegs from the fermentor.

Was this review helpful to you?

  1 of 1 people found the following review helpful:
 
5 of 5 SS Brew Bucket to Real Ale Cask Sunday, May 1, 2022
Reviewer: Kringlund-Oarssorvft McGlain  
This is THE hardware you want if you're looking to equip an SS Brewtech Brew Bucket for pressure transfer / dispensing.

No other hardware is needed.  The inner threads fit nicely into the 17mm hole in the top of the brew bucket and it threads air tight.  

For my use case, I have wine on tap and "casked" ale in the 3.5 gal mini brew buckets.  I add 1-2 lbs of tap gas through the ball lock and gravity dispense.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Friday, December 3, 2021
Reviewer: Anonymous Person from Perrysburg, OH United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Good Products and Good Service Friday, August 13, 2021
Reviewer: brewprentice from the Buckeye state  
I had no problems with my order whatsoever.  I chose the bulkhead fittings because of their recessed o-ring design.  I had ordered 2 fittings from another outlet but they were not as well designed as the ones I got from BrewHardware.  Keep up the good work guys.

Was this review helpful to you?

  2 of 2 people found the following review helpful:
 
5 of 5 Perfect! Sunday, April 25, 2021
Reviewer: Kyle from Oklahoma  
Bought this to fill the airlock hole on my SS brew bucket, so I could purge kegs with CO2 from fermentation. Another reviewer mentioned needing a washer because the hole was too large, I didn't find this was the case and was able to screw this directly in the hole with no extra pieces and use as I intended to.

Was this review helpful to you?

View All Customer Reviews


Suspicious Brown Van (American Brown Ale) - 5 Gal All Grain Kit $26.40
Ball Lock Keg Disconnect ALL STAINLESS - Gas Side - Male Flare MFL $16.99
CO2 Manifold 6-way Splitter - MFL I/O BH $54.99
Anvil Bucket Fermenter - 4 Gallon (ANV-FV-4gal) $143.00
Extract Kit: Suspicious Brown Van (American Brown Ale) $42.00
Push Fit Fitting - 8mm (5/16") OD tube x 5/16" Male Flare for Jockeybox Chill Plates $2.75
Spike CF15/CF30 Temperature Control Coil $121.00
1/8" NPT Male to 1/4" MFL Male Flare Adapter $2.75
Oak, American Spirals, Heavy Toast, 8" 2 pack $9.89