Home > Equipment > Vinyl Decals >

Sight Calibration Decals 5-300 in increments of 5
Sight Calibration Decals 5-300 in increments of 5
 
Our Price: $9.00

Quantity in Stock:6

Product Code: CAL5-300
Qty:

  
Description
 
These were custom made for a few nano breweries in the past so we decided to offer them up as a standard product. These numbers are slightly larger than our standard 2-15 decals because we assume the area they will be stuck to is a little larger.

The numbers and arrows are exactly 1/2" tall. The two-digit numbers including the arrow are 3/4" wide and then it goes up to about 1-1/4" after the 100. If this is too wide, you could always apply the arrows at the calibration locations and stack the label number under or over the arrow.
Instructions
    • Your sight tubing must be dry and clean with no oils or dust.
    • With the clear plastic top masking still in place, cut each number squarely off the strip at the left edge of the number/arrow.


    • Use a vertically applied length of masking tape on the sight tube as
    • a straight edge and to have a place to mark the gallon levels.
    • Skip to the 11 minute mark in the video to see how the decals are to be applied.

Share your knowledge of this product. Be the first to write a review »


375 ml Green Bordeaux Wine Bottles, Case of 24 $28.99
Simcoe Hop Pellets, 8OZ $17.59
Garden Hose Adapter, Plastic, FGHT x 1/4" Push Fit $7.00
Extract Kit: British Nut Brown (You're gonna love my nuts) $47.30
Keg Low Profile Coupler SANKE American Beers (Type D) With Hose Barbs $37.99
CO2 Manifold 3-way Splitter - MFL I/O BH $31.99
BRY-97 American West Coast Ale Dry Yeast 11 g $3.84
Oxygenation Kit, Portable Cylinder Regulator, Economy Diffusion Wand $49.99
750ml Clear Bordeaux Wine Bottles, Case of 12 $18.99