Home > Equipment > Keg, Pot, Cooler Parts >

Make Weldless Kit 1/4" NPT for COOLERs
Make Weldless Kit 1/4" NPT for COOLERs
 
Our Price: $7.00

Quantity in Stock:13

Product Code: MWL14COOLER
Qty:

Description
 
If you want to install a dial thermometer in a double wall cooler, you'll need an extended bulkhead like these. Here's how they work: The dial thermometer threads directly into the open end of the coupling. The coupling extends through the outside wall and insulation of the cooler and then the weldless bushing/gasket seals to the interior wall of the cooler. This 1/4" NPT version requires a 3/4" hole in the outside wall of the cooler and a 1/2" hole in the interior wall. The weldless bushing piece in this assembly is custom machined just for us so this isn't something that can be easily made from "off the shelf" parts.

Keep in mind that this bulkhead is NOT meant for draining liquid out of your cooler.

The picture below shows the application of this bulkhead for use with a dial thermometer. The picture shows both available sizes. BE VERY CAREFUL WITH THE SIZES OF HOLES REQUIRED ON THE INSIDE AND OUTSIDE WALLS OF THE COOLER.

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Wednesday, September 19, 2018
Reviewer: David Kilgore from Jenison, MI United States  


Was this review helpful to you?



Flaked Rye LB $2.20
1/2" NPT to 1/2" OD Tube Compression Elbow $17.00
Brewer's Orchard Pink Guava Puree, 4.4 LB Aseptic Pouch $26.40
2" TC x 1/2" NPT THREADED TEE $18.00
Vintage Shop 6 Gallon PET Carboy Fermenter $22.00
Crystal 20L (Caramel Malt), Briess LB $2.48
TRUE Weldless Bulkhead - With 3/8 Compression Fitting Bore Thru $20.00
Brewzilla Heat Exchange Dish 65L (Gen 4) $28.99
Quick Disconnects (BLQD) Type A90 - MQD x FNPT with 90 degree elbow bend $7.99