Home > Equipment > Mashing >

Blichmann SMALL HERMS Coil (aHERMSCoil-S)
Blichmann SMALL HERMS Coil (aHERMSCoil-S)
 
Our Price: $141.00

Quantity in Stock:(Out of Stock)

Product Code: BLICHMANNHERMSSMALL
Qty:

Description
 
The Blichmann small weldless HERMS coil has less overall tubing length (25 feet) and is great for smaller pots.
  • Dimensions: 7.75" Tall x 9.375" Diameter
  • Fittings Dimensions: 7.75" center to center
  • Connections: 1/2" NPT weldless
  • Includes: Two 1/2" Elbow QuickConnector fittings
THIS ITEM MAY be drop shipped directly from Blichmann so allow a few extra days for processing.

We prefer using a ball valve on the lower ports of HERMS coils to allow hose disconnect without fully draining the coil. If you want to do that, keep in mind you'll need to add a hex nipple on the outside of the valve to use the included quick connectors. We also prefer camlock fittings for faster connections and if you go that route, use a camA on the top port of the coil and a camF on the lower port after the recommended ball valve.


If you would like us to install this coil in either a pot you bring in to the shop or one you plan on buying from us for shipping, simply add quantity two of the labor charge found in the accessories list to the right. Unless you tell us otherwise, we mount the ports at the pot's 5 o'clock position, just to the right of the drain, as low as possible.

Accessories
Camlock Quick Disconnects - Cam A Hex Nipple, 1/2" NPT PREMIUM LOOSE 2-piece (2pc) Ball Valve, 1/2" NPT, F/F Premium Labor Charge - Drill Hole and Install Weldless Component
Our Price: $4.25

Add
Our Price: $5.99

Add
Our Price: $13.99

Add
Our Price: $9.00

Add
Camlock Quick Disconnects - Cam A Hex Nipple, 1/2" NPT PREMIUM LOOSE 2-piece (2pc) Ball Valve, 1/2" NPT, F/F Premium Labor Charge - Drill Hole and Install Weldless Component
Camlock Quick Disconnects - Cam F Blichmann Gasketed 1/2" NPT to 1.5" TC adapter (BE-500022-00)
Our Price: $4.50

Add
Our Price: $15.99

Add
Camlock Quick Disconnects - Cam F Blichmann Gasketed 1/2" NPT to 1.5" TC adapter (BE-500022-00)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 1 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Great construction Tuesday, April 23, 2019
Reviewer: Josh from APO, AP United States  
It's built well. I contorted this thing a lot trying to wrench down the fittings during install and probably abused it more than I should but it held up. Solid.

Was this review helpful to you?



Flaked Corn (Maize) OZ $0.14
X-SERIES Modular 3pc Ball Valve - END BLOCK MNPT $4.99
1.5 TC EPDM Gasket with 10 Mesh Screen $7.99
CO2 Hose - Bevlex Tubing, Ball Lock QD to open end (for barbs) $8.99
Install Tool (pull through flaring) for 1.5" TC Weld Ferrules $29.99
Silicone Tubing, Imported, 1/2" ID x 3/4" OD (1/8" Thick Walls) PER FOOT $2.65
Sanke Keg Coupler Premium FULL STAINLESS, American Beers (Type D) $39.00
CO2 Manifold 4-way Splitter - MFL I/O BH $39.99
CO2 Manifold 5-way Splitter - MFL I/O BH $47.99