Heating Element, 15G Slingblade, 1.5" TC INTEGRATED 4500w

Home > Equipment > Electric Brewing > Heating Elements >

Alternative Views:

Our Price: $119.99

Quantity in Stock:(Out of Stock)

Product Code: ELEMENTSLINGBLADE15

Slingblade Resize Mod:

Qty:	Email me when Back-In-Stock

Description

This is the 15 Gallon version of the Sling Blade Element. BrewHardware.com NOTE: Although this is sized to fit a typical 15 gallon pot, we have been successful in gently tightening up the radius of the element to fit smaller kettles. The 15 can be manipulated into a 10 for example. We do it in house, be sure to select that option in the drop down. This has the advantage of getting a higher wattage than the OEM fit elements. This mod will add a couple days to the shipping timeline of your order.

The BrewBuilt SlingBlade's unique crescent-shaped design promotes a rolling boil and even heat distribution. This electric heating element places all of the heating power on one side of the kettle, sending thermal energy upward to the surface that then cascades downward on the opposite side of the kettle. This movement creates a natural turbulence that evenly distributes heat while creating a vigorous boil. By being located on one side of the kettle, the other side is clear for immersion chillers.

The SlingBlade heating elements were designed to fit perfectly with BrewBuilt brewing kettles, but you may find them suitable for other kettles as well. They should be used with T.C. ferrules no longer than 1" in length. For dimensions and recommended minimum kettle diameter, please see the chart below. Note: These elements ARE compatible with Brewhardware's TRUE Weldless 1.5" TC Triclamp Bulkhead - STD up to 1/8" Wall

Features:

Made from Stainless Steel with proprietary coating for long life
1.5" Tri-Clamp connection
Unique offset design promotes rolling boil
Ultra-Low Watt Density eliminates scorching
UL Certified components

Specs:

240 Volt
L6-30 plug
20 Amp breaker required for 10 & 15 gal element
30 Amp breaker required for 22 & 31 gal element
- 50-gallon kettle requires 2 x BE437 and 2 x 30 amp circuits

Size	Wattage	Length	Radius	Min. Kettle Diameter
10 gal	3750	13.25"	6.3"	13.75"
15 gal	4500	16.75"	7.3"	15.75"
22 gal	5000	17.25"	8.3"	17.75"
31 gal	5750	19.5"	9.3"	19.75"

Please note: Length is measured from the tip of the heating element to the T.C. connection. Radius is measured from the middle of the T.C. connection to the outermost edge of the element's curve.

It is extremely important that you consult with an electrical professional for advice or wiring help. Under no circumstances should these be used without proper wiring, ground fault circuit protection, over current circuit protection. We are not licensed electricians so we cannot provide wiring advice.

After years of experience with these types of elements, we have concluded that the connectivity between the L6-30 prongs and the mating female receptacle is a common point of failure as oxidation from humid environments begins to degrade conductivity. The best long term solution we've come up with is the use of a light coating of a product called Conductive Assembly Paste. It is expensive and not usually available in tiny packages but we've done the repackaging locally. We now include a 1mL syringe of this paste with the purchase of this style of element. Note that we only include a single 1mL tube for up to 3 elements purchased.