Home > Equipment > Fittings / Camlocks / Triclover > Camlock Quick Disconnects >

Camlock Quick Disconnects - Cam DC (cap)
Camlock Quick Disconnects - Cam DC (cap)
 
Our Price: $5.25

Quantity in Stock:47

Free Shipping
Product Code: CAMDC
Qty:

Description
 
Type DC - Female QD Coupling to block off cap. Similar to the B and D but just a blank block off. They're sold as duct caps but it's also a liquid tight solution as sound as any other coupling here. If all you want to do is keep dust out of the male parts, check out the vinyl caps below.

Our stainless steel Camlock style disconnects (sometimes called cam and groove) are the best compromise between cost and function for making and breaking connections between your vessels, chillers, pumps and hose sets. Eventually you get tired of pushing tubing onto hose barbs and adjusting worm gear clamps. These are cheaper than triclovers and all other stainless steel quick disconnect designs. Best of all, they are milspec standard around the world so you'll never get stuck with a single vendor's proprietary disconnect system and have trouble adding on to it several years down the road.

We offer a large selection of standard and custom high flow camlocks. They come standard with replaceable food grade silicone gaskets.
The "quick disconnect" or business portion of the camlock system consists of male and female parts. The male side is a cylinder with an external concave recess around the circumference and a front sealing face. Once inserted into the female coupling, a set of cammed arms are drawn back to apply pressure to the male's recess which locks the parts together and holds the male's sealing face tight to the captured gasket.

Average Rating: Average Rating: 4.5 of 5 4.5 of 5 Total Reviews: 14 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Quick Connect End Caps April 3, 2024
Reviewer: frederick oftel from Bayfield, WI United States  
Perfect part to sealing the sanitized counterflow chiller or the hop-back

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Very handy February 4, 2023
Reviewer: Jay Hager from Bend, OR United States  
Simple solution to clamping off tubes. Hangs on my brew stand with copper wire.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 May 29, 2020
Reviewer: Dustin Schiavo from CA United States  


Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 A real JB review April 28, 2019
Reviewer: JB from New Orleans, LA United States  
So far I've been satisfied with the products I've received. This one is also superb thank you.

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
1 of 5 One worked, one didn't October 7, 2018
Reviewer: Scott Swindells from Chesterfield, MO United States  
Hard to imagine something this simple can't perform it's sole simple function, but it couldn't. I bought 2 and 1 of them can't latch onto any of my male camlocks. E-mailed to report the issue and no response after a week.

It's officially a streak now. 3 orders in a row with stuff that doesn't work.

Brewhardware Response: You must be the most unlucky customer we've encountered. No exaggeration, we've sold 100,000 units of camlocks over the years and I can count on one hand how many times we had closure issues. I know we've sent thinner gaskets to you in the past but we probably should have looked more closely at the male cams since it now seems they were out of spec given later problems with completely different female cams.

Was this review helpful to you?

View All Customer Reviews