Home > Equipment > Fittings / Camlocks / Triclover > Camlock Quick Disconnects >

Camlock Quick Disconnects - Cam E (reduced barb)
Camlock Quick Disconnects - Cam E (reduced barb)

Our Price: $4.00

Quantity in Stock:8

Product Code: CAME

Type E - Male QD / HOSE BARB. The type E is similar to the A and F but instead of threads, it has a 1/2" hose barb on the back end. The barb is rather restrictive, however, if you're using smaller tubing, the E is just fine. Want better flow" Look for the Big E instead

Our stainless steel Camlock style disconnects (sometimes called cam and groove) are the best compromise between cost and function for making and breaking connections between your vessels, chillers, pumps and hose sets. Eventually you get tired of pushing tubing onto hose barbs and adjusting worm gear clamps. These are cheaper than triclovers and all other stainless steel quick disconnect designs. Best of all, they are milspec standard around the world so you'll never get stuck with a single vendor's proprietary disconnect system and have trouble adding on to it several years down the road.

We offer a large selection of standard and custom high flow camlocks. They come standard with replaceable food grade silicone gaskets.
The "quick disconnect" or business portion of the camlock system consists of male and female parts. The male side is a cylinder with an external concave recess around the circumference and a front sealing face. Once inserted into the female coupling, a set of cammed arms are drawn back to apply pressure to the male's recess which locks the parts together and holds the male's sealing face tight to the captured gasket.
Ultimate application is up to the user, but it is most common to use the male part on fixed brewery components while the female coupling end is typically installed on the more mobile parts like hose sets. Why" The movable cam arms need room to swing.


Average Rating: 5 of 5 Total Reviews: 4 Click Here to Write a Review »

Vinyl Camlock Cover
Our Price: $1.00

Vinyl Camlock Cover

  0 of 0 people found the following review helpful:
February 5, 2018
Reviewer: Nathan Cole from Havre, MT United States  

Was this review helpful to you?

  0 of 0 people found the following review helpful:
going electric and using a pump October 17, 2016
Reviewer: Donald Schubert from Vernon, CT United States  
excelent support and products, helped me make the transition to all electric brewing and pumping Vs gravity system

Was this review helpful to you?

  0 of 0 people found the following review helpful:
Camlock March 29, 2016
Reviewer: Carl Noble from Tell City, IN United States  
Love these

Was this review helpful to you?

  1 of 1 people found the following review helpful:
Soldered onto 3/8" copper chiller February 24, 2015
Reviewer: Brandon White from Cypress, TX United States  
Hard to beat these for the price.  I cutoff the barb using a grinder and cutoff wheel, then opened up the hole to 3/8" using a drill press.  I then soldered it onto my counter-flow chiller wort line using Stay Brite flux and solder.

This results in a pretty good amateur sanitary connection.  I'm trying to avoid pipe threads where possible.  Way cheaper than the Blichmann QuickConnectors and I'm happier with the result.

Was this review helpful to you?