 |
 |
 |
|
Deliver mash recirculation wort and sparge water precisely to the top of any grain bed height with this kit. This was designed specifically for mashing vessels (or BIAB kettles) that have a 1.5" TC port in the lid. It would also work great in an Anvil Foundry system that has the appropriate TC adapter installed. You can adjust the output from the same height as the port all the way down to 12" below the port to adjust for varying grain bills. The height adjustment is done with a compression fitting on the top of the TC adapter which can be tightened and loosened and tightened by hand. The bottom of the 3/8" stainless tubing has a plastic diffusor tip on the bottom to spread out the flow. Ideally this is placed at the top of the grain bed to avoid unecessary splashing.
Options:
Basically you choose what kind of connector is welded to the top input side of the cane whether plain 3/8 tubing, QD, Camlock, or Triclamp.
These are built upon order so expect a few extra days of fabricatoin time.
- SPECs from the manufacturer:
Material: Acetal Copolymer
Compatibility:Yes: Acetone, Alcohol, Ethyl, Greases, Oils, Commercial Dish Detergents, Gasoline, Lacquer Solvents, Sodium HydroxideNo: Acids, Ammonium Hydroxide, Bases Strong, Hypochlorite Ion Solutions, Sodium Hypochlorite
Melting Point: 329° F Maximum Operating Temperature: 170° F (Repeated exposure over this temperature will cause fatigue)
"Acetal Copolymer" appears to be the generic name for Delrin. More about Delrin on Dupont's site here.
More about food contact from a distributor:
Q: Is Loc-Line safe for food contact"
A: The material used to manufacture Loc-Line is an acetal copolymer. This material, in accordance to the rules 21 CFR 177.2470, meets the requirements of this regulation for aqueous food contact. Not applicable for fatty foods and alcohol. All colorants are used at the recommended let-down ratio and meet 21 CFR 178-3297 for food contact.
|
|
|
 |
|
 |
|
