Home > Steam Slayer Install Kit for Anvil Foundry 6.5 and 10.5 Lids
	Our Price: $68.00 Product Code: STEAMSLAYERFOUNDRYKIT Qty: The following items are included with this product: 1 of Anvil Foundry Lid TC Adapter Bulkhead ($20.00 value!) 3 of 1.5 TC Clamp ($21.00 value!) 1 of 1.5" TC 90 degree Elbow ($18.00 value!) 3 of 1.5 TC Silicone Gasket (Heat Resistant to 400F) ($6.00 value!) 1 of 1.5" TC Spool, 1.7" Depth ($12.00 value!)

Description   Note that this kit is specifically for adapting the Steam Slayer product. In addition to this kit, you must purchase the steam slayer product itself. Between the steam slayer and this kit, you'll be able to remove the plastic knob handle on the Anvil Foundry lid and easily install the Steam Slayer as shown in the picture below. If you have a system similar to the Foundry and want to know if the kit will work with the hole size you have in the lid, contact us with the measurements and we will advise you. Here are the items included in the kit. Note that prices may fluctuate on the site and this image will likely not be updated... do not use it as a pricing guide. This kit pulls from individual parts inventory. If you are unable to add this to the cart, it will tell you what part is out of stock. Give us a call... maybe our inventory is wrong. Average Rating: 5 of 5 Total Reviews: 3 Click Here to Write a Review »

0 of 0 people found the following review helpful:

Attachments work great November 28, 2022 Reviewer: Bernie Thibeault from Colchester, VT United States   Worked great! Was this review helpful to you?

0 of 0 people found the following review helpful:

It works as stated (and hoped!) September 29, 2022 Reviewer: DM from Central IL   Switched to an 6.5 Anvil a couple years back (vs. propane) to brew indoors. Various "moisture exhaust devices" didn't do it. This design works. Ran a couple boils w/o grain to get the process down. 60 min boil off was about 1 liter at 110v & using a bucket & pump to recirculate cooling H20 cut down on water loss (added ice half way through). If you are on the fence, go for it. Bobby: thanks for the info. Was this review helpful to you?

0 of 0 people found the following review helpful:

Fits Mash & Boil Series 2 Lid April 19, 2022 Reviewer: Paddys House Ales and Lagers from Matawan, NJ United States   Just what I needed to get the Steam Slayer set up on my Mash and Boil Series 2 lid! Was this review helpful to you?