Home > Equipment > Kegging Parts >

Sanke Type D or S Cleaning Jumper Cap
Sanke Type D or S Cleaning Jumper Cap
 
Alternative Views:
Our Price: $10.99

Quantity in Stock:28

Product Code: SANKECLEANINGCAP
Qty:

Description
 
Lock this simple device on to the bottom of any Sanke Type D (American) or Type S (euro) keg coupler and you can clean both the coupler and your beer lines in one step. What's this black magic you ask? Whether you like to clean your lines with a pump type tank or by pumping cleaning solution with a submersible pond pump, all you have to do is:

1. Screw on the Jumper Cap.
2. Attach cleaning hose source to the GAS IN port on the coupler.
3. Put lever in the tapped (down) position.
4. Push some hose onto your faucet spout and route into a catch bucket or where your pond pump is located.
5. Start pump and open your faucet.

Again, this cleans your coupler, your lines, and your faucet all in one easy step.

Accessories
Hex Beer Nut for Shanks and Keg Couplers - BEER THREAD (5/8 BSP aka 7/8-18") NOT NPT Tailpiece, 3/8" Barb, Stainless Steel Cleaning Brush, 3/4" diameter Tailpiece, 1/2" Barb, Stainless Steel
Our Price: $0.99

Add
Our Price: $2.75

Add
Our Price: $3.85

Add
Our Price: $4.50

Add
Hex Beer Nut for Shanks and Keg Couplers - BEER THREAD (5/8 BSP aka 7/8-18") NOT NPT Tailpiece, 3/8" Barb, Stainless Steel Cleaning Brush, 3/4" diameter Tailpiece, 1/2" Barb, Stainless Steel
Beer Line Cleaner, BLC (32 Oz)
Our Price: $19.99

Add
Beer Line Cleaner, BLC (32 Oz)

Average Rating: Average Rating: 5 of 5 5 of 5 Total Reviews: 2 Click Here to Write a Review »

  0 of 0 people found the following review helpful:
 
5 of 5 Flusher line cleaning cap Friday, September 4, 2026
Reviewer: Nicolas Loud from Winthrop, MA United States  
Much better than the cold break ones!

Was this review helpful to you?

  0 of 0 people found the following review helpful:
 
5 of 5 Sanke Type D or S Cleaning Jumper Cap Monday, June 22, 2020
Reviewer: George Reilly from Bridgewater , NJ United States  
The cap worked perfectly and I was able to clean out my beer line within minutes.

Was this review helpful to you?



Rubber Stopper, Drilled, #5.5 $0.99
Through Wall Shank (Beer Threads on Both Ends) For Jockey Box $19.99
Heat Shield Small, Clips on to 1/4" NPT sized fittings $10.00
Flavoring, Natural, Blackberry, 4oz $5.34
Picnic Faucet, Premium Stainless Steel, with 1/4" MFL connection $23.99
SS Locknut, 1/2" NPS Pipe Thread with Large Flange $4.99
Rubber Stopper, SOLID, #5.5 $0.75
White Labs PPNG WLP500 Monastery Ale Liquid Yeast Pack $15.39
Thread In High Port Whirlpool Return $23.00